Swap Bloqué ?

[Geo83]

Bonjour,
j’ai installé Mandriva linux 2009 sur mon ordinateur et je rencontre un petit problème : l’OS rame vraiment beaucoup. En regardant en détail d’où pourrait venir le problème, j’ai décoouvert que la mémoire SWAP était détectait mais jamais utilisée.
Le système détecte ma partition swap de 2Go mais ne l’utilise pas, il y a toujours en permanance les 2Go de libre, et ce cela qui fait que mon système d’exploitation rame.

Quelqu’un a-t-il déjà eu ce problème ? quelqu’un peut il m’aider à résoudre cela ?

[lithium]

Comment se manifestent ces lenteurs au juste ?
Et de quelle quantité de mémoire vive tu dispose ?

[Geo83]

je dispose de 4Go de RAM, et ces lenteur sont visible en fait lorsque je lance ou quit une application, il y a même parfois quelques “freeze” du système durant 20s.

[KP2]

Bonjour,
j’ai installé Mandriva linux 2009 sur mon ordinateur et je rencontre un petit problème : l’OS rame vraiment beaucoup. En regardant en détail d’où pourrait venir le problème, j’ai décoouvert que la mémoire SWAP était détectait mais jamais utilisée.
Le système détecte ma partition swap de 2Go mais ne l’utilise pas, il y a toujours en permanance les 2Go de libre, et ce cela qui fait que mon système d’exploitation rame.

Quelqu’un a-t-il déjà eu ce problème ? quelqu’un peut il m’aider à résoudre cela ?

Le swap est horriblement plus lent que la ram (normal c’est sur le disque) donc le systeme l’utilise le moins possible… Pas comme windows qui en fait un usage immodere ce qui lui pose des problemes de performances certains (sans compter les acces disques presque continus sans aucun interet)

Donc, avec 4go de ram, c’est absolument normal que le swap ne soit pas utilise… d’ailleurs, tu aurais meme pu ne pas en mettre.

Par contre, c’est effectivement anormal d’avoir des freeze de 20s sur la fermeture ou l’ouverture d’applis. Neanmoins, ca peut dependre des applis. Ca arrive sur lequelles ?

[Geo83]

cela arrive sur un peu toutes les applications en fait, c’est un peu troublant.
Mais d’apres mes anciennes expériences Linux, la mémoire Swap optimisait largement mon système et sa rapidité. J’arrivais, pour exemple, à faire tourner des jeux vidéos très beaux en qualité graphique maximum alors windows xp arrivait à peine à les lancer sans crasher.

Cela dit, c’est effectivement possible que le système n’ait plus besoin de Swap avec un pc à 4Go de Ram, mais cela me parait bizzare puisque je n’ai jamais vu une seule distribution Linux tourner avec autant de difficultés que cela. Donc peut etre que cela est quand meme lié à la rame ??

PS: meme la lecture d’une vidéo rame énormément…

[KP2]

cela arrive sur un peu toutes les applications en fait, c’est un peu troublant.
Mais d’apres mes anciennes expériences Linux, la mémoire Swap optimisait largement mon système et sa rapidité. J’arrivais, pour exemple, à faire tourner des jeux vidéos très beaux en qualité graphique maximum alors windows xp arrivait à peine à les lancer sans crasher.

nan nan, c’est pas la swap qui permet ca… c’est linux tout entier :sol:

Cela dit, c’est effectivement possible que le système n’ait plus besoin de Swap avec un pc à 4Go de Ram, mais cela me parait bizzare puisque je n’ai jamais vu une seule distribution Linux tourner avec autant de difficultés que cela. Donc peut etre que cela est quand meme lié à la rame ??

PS: meme la lecture d’une vidéo rame énormément…

T’as active les effets 3D ?
T’as quoi comme carte video ?
A mon avis, ce sont les drivers video qui foutent la zone
Edité le 04/11/2008 à 21:21

[Geo83]

c’est certain que Linux a de gros avantages sur les performance par rapport à XP

Sinon j’ai activé des effets graphiques 3D oui, mais lorsque je ne les avait pas encore mis le problème était déjà là, c’est d’ailleurs pour ça que je les ai installé (pour voir si cela venait de la carte graphique).
Mais ma carte graphique fonctionne très bien apparement puisque certaines applications 3D en plein écran, avec pleins d’effets 3D, marchent sans aucun problème. C’est une Nvidia Geforce Quadro 570, avec des drivers officiaux, et là tout va bien, le problème vient à coup sûr d’autre part

[KP2]

c’est certain que Linux a de gros avantages sur les performance par rapport à XP

Sinon j’ai activé des effets graphiques 3D oui, mais lorsque je ne les avait pas encore mis le problème était déjà là, c’est d’ailleurs pour ça que je les ai installé (pour voir si cela venait de la carte graphique).
Mais ma carte graphique fonctionne très bien apparement puisque certaines applications 3D en plein écran, avec pleins d’effets 3D, marchent sans aucun problème. C’est une Nvidia Geforce Quadro 570, avec des drivers officiaux, et là tout va bien, le problème vient à coup sûr d’autre part

ben la, il va falloir chercher un peu et faire attention au moindre detail pouvant amener sur la piste de la solution…
Investiguer un probleme de performance est vraiment chiant…

Essaye quand meme de lancer un top dans un terminal au cas ou tu aurais un processus qui monopolise ta machine. A moins d’une appli vraiment buggee, un reboot devrait regler un probleme de ce genre generalement donc je pense pas que ce soit une piste serieuse

[Geo83]

J’ai déjà vérifié à plusieurs reprises si une application monopolisait le CPU ou le GPU ou la RAM, mais je n’ai rien remarqué.
Quand au redémarrage du système, j’en ai fait déjà un bon paquet pour voir si ç’était juste un problème temporaire, mais bon le problème reste toujours.

[v_atekor]

Si tu penses vraiment que c’est la swap (hautement improbable avec 4Go de ram, mais bon … ) essaie de faire un

sudo swapoff

(lorsque la machine n’est pas trop chargée) et tu nous dis si ça continue.

---

Rien de suspect dans dmesg ?

[Geo83]

ok, merci pour le conseil, je désactive le swap puis le récative pour voir si ça change l’état du système ou non.

[Geo83]

Non apparement cela ne change rien au problème, en désactivant ou réactivant le swap ça rame toujours. C’est peut être le processeur qui est mal géré par l’OS, puisqu’il tourne assez souvent aux alentour de 60-80% juste en lançant une vidéo ou une application.
Mon CPU est un Intel Dual 2 Core T8300, 2.4GHz, donc il a largement les capacités pour supporter Linux, meme les dernieres distributions.

[fakbill]

swapoff sur un système bien chargé qui sawpe à mort (si c’est de cela dont on parle mais je ne crois pas), ça va tuer des processus.

Tu tapes top et tu nous copies le haut du résultat stp. Comme ça:

top - 22:07:50 up 2:29, 1 user, load average: 1.00, 0.81, 0.87
Tasks: 135 total, 4 running, 131 sleeping, 0 stopped, 0 zombie
Cpu(s): 59.3%us, 1.2%sy, 0.0%ni, 38.3%id, 0.0%wa, 0.0%hi, 1.2%si, 0.0%st
Mem: 2055884k total, 1722488k used, 333396k free, 83456k buffers
Swap: 1951888k total, 2232k used, 1949656k free, 889884k cached

[v_atekor]

Hmmm… Le processeur mal géré, sur une distribution aussi courante et sur un processeur intel, c’est à mon avis un des derniers des endroits à regarder.

Par contre si tu peux avoir un top en même temps, surveille le champs %wa, (Les entrées sorties sur le disque … )
Regarde aussi la commande dmesg, pour voir si il y a des trucs suspects. (Publie le résultat de la commande dmesg au besoin)

---

fakbill : avec 4Go de ram, et une machine peu chargée, il est plutôt à l'aise ;) Edité le 04/11/2008 à 22:12

[Geo83]

voici la réponse à la commande “top” :

top - 22:11:48 up 18 min, 2 users, load average: 0.79, 0.76, 0.72
Tasks: 131 total, 3 running, 128 sleeping, 0 stopped, 0 zombie
Cpu(s): 22.5%us, 10.3%sy, 0.0%ni, 66.0%id, 0.0%wa, 0.9%hi, 0.3%si, 0.0%st
Mem: 4064120k total, 1436376k used, 2627744k free, 151480k buffers
Swap: 2208896k total, 0k used, 2208896k free, 677704k cached

[v_atekor]

0% io wait : pas de soucis avec les disques
10.3% système : c’est absoluement énorme pour une machine non chargée. Il y a un driver qui foire.
La swap est vide, comme prévue.

Publie le résultat de la commande dmesg stp qu’on sâche lequel?
Edité le 04/11/2008 à 22:16

[Geo83]

je vous remerci vraiment tous d’essayer de régler mmon problème, c’est très sympa de votre part.
voici le résultat de la commande “dmesg” :

Initializing cgroup subsys cpuset
Linux version 2.6.27-server-0.rc8.2mnb (pterjan@klodia.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Oct 2 06:06:27 EDT 2008
Command line: BOOT_IMAGE=Linux_Mandriva_Powerpack_2009_x root=UUID=02951f08-a1c5-11dd-aab8-7d23978eebb3 splash=silent vga=788
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
 BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved)
 BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS)
 BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbffb0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bffb0000 page 4k
kernel direct mapping tables up to bffb0000 @ 8000-d000
last_map_addr: bffb0000 end: bffb0000
init_memory_mapping
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
last_map_addr: 140000000 end: 140000000
RAMDISK: 37c07000 - 37fef5bb
DMI 2.4 present.
ACPI: RSDP 000F7C60, 0024 (r2 HP    )
ACPI: XSDT BFFC81C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
ACPI: FACP BFFC8084, 00F4 (r4 HP     30C5            3 HP          1)
ACPI: DSDT BFFC84CC, 12E41 (r1 HP        8510x    10000 MSFT  3000001)
ACPI: FACS BFFE7D80, 0040
ACPI: SLIC BFFC8244, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
ACPI: HPET BFFC83BC, 0038 (r1 HP     30C5            1 HP          1)
ACPI: APIC BFFC83F4, 0068 (r1 HP     30C5            1 HP          1)
ACPI: MCFG BFFC845C, 003C (r1 HP     30C5            1 HP          1)
ACPI: TCPA BFFC8498, 0032 (r2 HP     30C5            1 HP          1)
ACPI: SSDT BFFDB30D, 032A (r1 HP       HPQPAT        1 MSFT  3000001)
ACPI: SSDT BFFDB637, 014E (r1 HP       HPQPRN        1 MSFT  3000001)
ACPI: SSDT BFFDC18D, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
ACPI: SSDT BFFDC3EC, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
ACPI: SSDT BFFDC492, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
ACPI: DMI detected: Hewlett-Packard
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
  NODE_DATA [0000000000001000 - 0000000000005fff]
  bootmap [000000000000c000 -  0000000000033fff] pages 28
(7 early reservations) ==> bootmem [0000000000 - 0140000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000837bcc]    TEXT DATA BSS ==> [0000200000 - 0000837bcc]
  #3 [0037c07000 - 0037fef5bb]          RAMDISK ==> [0037c07000 - 0037fef5bb]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bffb0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048399
  DMA zone: 2249 pages, LIFO batch:0
  DMA32 zone: 767976 pages, LIFO batch:31
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000
PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000
PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000
PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000
PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
PERCPU: Allocating 60064 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028785
Policy zone: Normal
Kernel command line: BOOT_IMAGE=Linux_Mandriva_Powerpack_2009_x root=UUID=02951f08-a1c5-11dd-aab8-7d23978eebb3 splash=silent vga=788
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2393.957 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4059560k/5242880k available (3156k kernel code, 134036k reserved, 1606k data, 556k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.91 BogoMIPS (lpj=23939570)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter 
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Hook version: 2.6.27-2.3 2008/08/29
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Early unpacking initramfs... done
Freeing initrd memory: 4001k freed
ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 12468539
Detected 12.468 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.94 BogoMIPS (lpj=23939733)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9575.86 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level NODE
   groups: 0-1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level NODE
   groups: 0-1
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at f8000000 - fbffffff
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:19.0 reg 10 32bit mmio: [e8000000, e801ffff]
PCI: 0000:00:19.0 reg 14 32bit mmio: [e8020000, e8020fff]
PCI: 0000:00:19.0 reg 18 io port: [5000, 501f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [5020, 503f]
PCI: 0000:00:1a.1 reg 20 io port: [5040, 505f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [e8021000, e80213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [e8024000, e8027fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [5060, 507f]
PCI: 0000:00:1d.1 reg 20 io port: [5080, 509f]
PCI: 0000:00:1d.2 reg 20 io port: [50a0, 50bf]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [e8028000, e80283ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [50c0, 50cf]
PCI: 0000:00:1f.2 reg 24 io port: [50d0, 50df]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [e5000000, e5ffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [e6000000, e7ffffff]
PCI: 0000:01:00.0 reg 24 io port: [4000, 407f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:01.0 io port: [4000, 4fff]
PCI: bridge 0000:00:01.0 32bit mmio: [e5000000, e7ffffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:10:00.0 reg 10 64bit mmio: [e4000000, e4001fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [e4000000, e40fffff]
PCI: bridge 0000:00:1c.4 io port: [2000, 3fff]
PCI: bridge 0000:00:1c.4 32bit mmio: [e0000000, e3ffffff]
PCI: 0000:02:06.0 reg 10 32bit mmio: [e4100000, e4100fff]
pci 0000:02:06.0: supports D1
pci 0000:02:06.0: supports D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
PCI: 0000:02:06.1 reg 10 32bit mmio: [e4101000, e4101fff]
pci 0000:02:06.1: supports D1
pci 0000:02:06.1: supports D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.1: PME# disabled
PCI: 0000:02:06.2 reg 10 32bit mmio: [e4102000, e41027ff]
pci 0000:02:06.2: supports D1
pci 0000:02:06.2: supports D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.2: PME# disabled
PCI: 0000:02:06.3 reg 10 32bit mmio: [e4103000, e41030ff]
pci 0000:02:06.3: supports D1
pci 0000:02:06.3: supports D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.3: PME# disabled
PCI: 0000:02:06.4 reg 10 32bit mmio: [e4104000, e41040ff]
pci 0000:02:06.4: supports D1
pci 0000:02:06.4: supports D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [e4100000, e43fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609]
ACPI: Power Resource [C238] (on)
ACPI: Power Resource [C254] (on)
ACPI: Power Resource [C17C] (off)
ACPI: Power Resource [C362] (off)
ACPI: Power Resource [C365] (off)
ACPI: Power Resource [C366] (off)
ACPI: Power Resource [C367] (off)
ACPI: Power Resource [C368] (off)
ACPI: Power Resource [C369] (off)
ACPI: Power Resource [C382] (off)
ACPI: Power Resource [C383] (off)
ACPI: Power Resource [C384] (off)
ACPI: Power Resource [C385] (off)
ACPI: Power Resource [C386] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0b: ioport range 0x500-0x55f has been reserved
system 00:0b: ioport range 0x800-0x80f has been reserved
system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: ioport range 0x1000-0x107f has been reserved
system 00:0d: ioport range 0x1100-0x113f has been reserved
system 00:0d: ioport range 0x1200-0x121f has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
system 00:0e: iomem range 0xcd200-0xcffff has been reserved
system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x4000-0x4fff
pci 0000:00:01.0:   MEM window: 0xe5000000-0xe7ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xe4000000-0xe40fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
pci 0000:00:1c.4:   MEM window: 0xe0000000-0xe3ffffff
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0:   IO window: 0x006000-0x0060ff
pci 0000:02:06.0:   IO window: 0x006400-0x0064ff
pci 0000:02:06.0:   PREFETCH window: 0xc4000000-0xc7ffffff
pci 0000:02:06.0:   MEM window: 0xcc000000-0xcfffffff
pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04
pci 0000:02:06.1:   IO window: 0x006800-0x0068ff
pci 0000:02:06.1:   IO window: 0x006c00-0x006cff
pci 0000:02:06.1:   PREFETCH window: 0xc8000000-0xcbffffff
pci 0000:02:06.1:   MEM window: 0xec000000-0xefffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x6000-0x6fff
pci 0000:00:1e.0:   MEM window: 0xe4100000-0xe43fffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000c4000000-0x000000cbffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [4000, 4fff]
bus: 01 index 1 mmio: [e5000000, e7ffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [e4000000, e40fffff]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 mmio: [0, 0]
bus: 28 index 0 io port: [2000, 3fff]
bus: 28 index 1 mmio: [e0000000, e3ffffff]
bus: 28 index 2 mmio: [0, 0]
bus: 28 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [6000, 6fff]
bus: 02 index 1 mmio: [e4100000, e43fffff]
bus: 02 index 2 mmio: [c4000000, cbffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
bus: 03 index 0 io port: [6000, 60ff]
bus: 03 index 1 io port: [6400, 64ff]
bus: 03 index 2 mmio: [c4000000, c7ffffff]
bus: 03 index 3 mmio: [cc000000, cfffffff]
bus: 04 index 0 io port: [6800, 68ff]
bus: 04 index 1 io port: [6c00, 6cff]
bus: 04 index 2 mmio: [c8000000, cbffffff]
bus: 04 index 3 mmio: [ec000000, efffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(1225835615.790:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7936
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20005100000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 556k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8021000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8028000
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: HP Integrated Module
usb 3-1: Manufacturer: Broadcom Corp
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: New USB device found, idVendor=06a3, idProduct=a503
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: GM3200 Laser Mouse
usb 7-1: Manufacturer: Saitek
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
ata1.00: ATA-8: FUJITSU MHW2160BJ G2, 8921, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 8921 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 < sda5 sda6 sda7 > sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561A  GH09 PQ: 0 ANSI: 5
ohci1394 0000:02:06.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e4102000-e41027ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f99291d3b10]
input: PS/2 Generic Mouse as /class/input/input3
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
tpm_inf_pnp 00:03: Found C239 with ID IFX0102
tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
ACPI: SSDT BFFDB84D, 02C1 (r1 HP      Cpu0Ist     3000 INTL 20060317)
ACPI: SSDT BFFDBB93, 05FA (r1 HP      Cpu0Cst     3001 INTL 20060317)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Sleep Button (CM) as /class/input/input5
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT BFFDB785, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
ACPI: SSDT BFFDBB0E, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Sleep Button (CM) [C274]
input: Lid Switch as /class/input/input6
Clocksource tsc unstable (delta = -140478285 ns)
ACPI: Lid Switch [C26E]
ACPI: Battery Slot [C1F4] (battery present)
ACPI: Battery Slot [C1F3] (battery absent)
ACPI: AC Adapter [C1F2] (on-line)
ACPI: WMI: Mapper loaded
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ2] (60 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ3] (53 C)
thermal LNXTHERM:03: registered as thermal_zone2
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
ACPI: Thermal Zone [TZ4] (33 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ5] (30 C)
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
acpi device:03: registered as cooling_device2
input: Video Bus as /class/input/input7
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ1] (61 C)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
ACPI: Video Device [C14B] (multi-head: yes  rom: no  post: no)
usbcore: registered new interface driver hiddev
input: Saitek GM3200 Laser Mouse as /class/input/input8
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
aes2501 probe !
num_altsetting == 1
BULK COUNT 2
BULK IN 0 ; size = 32
BULK OUT 1
aes2501: device now attached to aes2501-0
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
input,hidraw0: USB HID v1.10 Mouse [Saitek GM3200 Laser Mouse] on usb-0000:00:1d.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usbcore: registered new interface driver aes2501
ppdev: user-space parallel port driver
ACPI: Transitioning device [C36A] to D3
fan PNP0C0B:00: registered as cooling_device3
ACPI: Fan [C36A] (off)
ACPI: Transitioning device [C36B] to D3
fan PNP0C0B:01: registered as cooling_device4
ACPI: Fan [C36B] (off)
fan PNP0C0B:02: registered as cooling_device5
ACPI: Fan [C36C] (on)
fan PNP0C0B:03: registered as cooling_device6
ACPI: Fan [C36D] (on)
fan PNP0C0B:04: registered as cooling_device7
ACPI: Fan [C36E] (on)
ACPI: Transitioning device [C36F] to D3
fan PNP0C0B:05: registered as cooling_device8
ACPI: Fan [C36F] (off)
ACPI: Transitioning device [C387] to D3
fan PNP0C0B:06: registered as cooling_device9
ACPI: Fan [C387] (off)
ACPI: Transitioning device [C388] to D3
fan PNP0C0B:07: registered as cooling_device10
ACPI: Fan [C388] (off)
fan PNP0C0B:08: registered as cooling_device11
ACPI: Fan [C389] (on)
fan PNP0C0B:09: registered as cooling_device12
ACPI: Fan [C38A] (on)
fan PNP0C0B:0a: registered as cooling_device13
ACPI: Fan [C38B] (on)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:29:7d:f2:b6
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20)
sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:10:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
ricoh-mmc: Controller is now disabled.
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c5]
Yenta: ISA IRQ mask 0x0438, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c5]
Yenta: ISA IRQ mask 0x0c38, PCI irq 17
Socket status: 30000810
Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff
cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
pcmcia: registering new device pcmcia1.0
Uniform Multi-Platform E-IDE driver
Probing IDE interface ide0...
ide0 at 0x6100-0x6107,0x610e on irq 17
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
ide-cs: hda: Vpp = 0.0
Non-volatile memory driver v1.2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT3 FS on sda7, internal journal
fuse init (API version 7.9)
loop: module loaded
Adding 2208896k swap on /dev/sda6.  Priority:-1 extents:1 across:2208896k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
firmware: requesting iwlwifi-4965-2.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
nvidia: module license 'NVIDIA' taints kernel.
wlan0: authenticate with AP de:93:26:ed:47:80
wlan0: authenticated
wlan0: associate with AP de:93:26:ed:47:80
wlan0: RX AssocResp from de:93:26:ed:47:80 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.80  Wed Oct  1 14:43:46 PDT 2008
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
ip6_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level NODE
   groups: 0-1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level NODE
   groups: 0-1
Adding 2208896k swap on /dev/sda6.  Priority:-1 extents:1 across:2208896k
NVRM: Xid (0001:00): 13, 0004 00000000 0000502d 00000104 00000001 00000100
NVRM: Xid (0001:00): 13, 0004 00000000 0000502d 00000104 00000001 00000100
NVRM: Xid (0001:00): 55,  L0 -> L0
elisa[15031]: segfault at 3ab0d780 ip 00007fc828b98a67 sp 000000004748df20 error 6 in libpulse.so.0.4.1[7fc828b60000+4e000]
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec
Adding 2208896k swap on /dev/sda6.  Priority:-1 extents:1 across:2208896k
CE: hpet increasing min_delta_ns to 50624 nsec

[v_atekor]

segfault at 3ab0d780 ip 00007fc828b98a67 sp 000000004748df20 error 6 in libpulse.so.0.4.1

Soucis avec le serveur de son?
T’as tout qui marche avec le son/multimédia?

[Geo83]

ben je n’ai pas détecté de problème sonore, cela dit il ne me semble pas etre en stéréo, j’ai l’impression d’etre en mono, est c surement vrai. le problème pourrait venir de là ?

[v_atekor]

C’est une piste. Est ce que le problème s’aggrave lorsque tu joues de la musique, ou que tu regardes un film ?