regarder une vidéo fait ramer le pc, et la vidéo par la meme occasion, mais de la musique ? je ne sais pas si cela rame pluss avec de la musique ou pas.
…
Apres un test, je dirai que le CPU perd 15% environ en écoutant une musique, c’est quand meme gros pour un Dual2Core 2,4GHz. mais je ne peux pas dire à 100% que ça vienne de là le pb, mais c tout à fait possible.
Ok, en tout cas il y a un bug qui est remonté jusqu’au niveau du noyau.
Regarde si il y a des mises à jour pour pulseaudio / Pulse / libpulse, et plus généralement ce qui a avoir avec le son/audio C’est déjà un bon point à vérifier.
Pour le reste, la suite demain (sauf si fakbill ou KP2 prenne le relais). Bonne soirée.
Merci pour ton aide v_atekor, je regarde de suite pour les mises à jour mais il me semble que j’ai les dernières versions.
bonne soirée aussi, ou bonne nuit 
Edité le 04/11/2008 à 22:39
Non le problème ne vient apparement pas des drivers ou librairies sonores, en tout cas le fait d’installer les dernières versions ne change rien à première vue.
C’est vraiment très curieux.
voici mon "dmesg" après les quelques modifications opérées et un reboot :
Initializing cgroup subsys cpuset
Linux version 2.6.27-server-0.rc8.2mnb (pterjan@klodia.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Oct 2 06:06:27 EDT 2008
Command line: BOOT_IMAGE=Linux_Mandriva_Powerpack_2009_x root=UUID=02951f08-a1c5-11dd-aab8-7d23978eebb3 splash=silent vga=788
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved)
BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS)
BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbffb0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bffb0000 page 4k
kernel direct mapping tables up to bffb0000 @ 8000-d000
last_map_addr: bffb0000 end: bffb0000
init_memory_mapping
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ b000-11000
last_map_addr: 140000000 end: 140000000
RAMDISK: 37c07000 - 37fef5bb
DMI 2.4 present.
ACPI: RSDP 000F7C60, 0024 (r2 HP )
ACPI: XSDT BFFC81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP BFFC8084, 00F4 (r4 HP 30C5 3 HP 1)
ACPI: DSDT BFFC84CC, 12E41 (r1 HP 8510x 10000 MSFT 3000001)
ACPI: FACS BFFE7D80, 0040
ACPI: SLIC BFFC8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET BFFC83BC, 0038 (r1 HP 30C5 1 HP 1)
ACPI: APIC BFFC83F4, 0068 (r1 HP 30C5 1 HP 1)
ACPI: MCFG BFFC845C, 003C (r1 HP 30C5 1 HP 1)
ACPI: TCPA BFFC8498, 0032 (r2 HP 30C5 1 HP 1)
ACPI: SSDT BFFDB30D, 032A (r1 HP HPQPAT 1 MSFT 3000001)
ACPI: SSDT BFFDB637, 014E (r1 HP HPQPRN 1 MSFT 3000001)
ACPI: SSDT BFFDC18D, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT BFFDC3EC, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
ACPI: SSDT BFFDC492, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
ACPI: DMI detected: Hewlett-Packard
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [0000000000001000 - 0000000000005fff]
bootmap [000000000000c000 - 0000000000033fff] pages 28
(7 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000837bcc] TEXT DATA BSS ==> [0000200000 - 0000837bcc]
#3 [0037c07000 - 0037fef5bb] RAMDISK ==> [0037c07000 - 0037fef5bb]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bffb0
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048399
DMA zone: 2249 pages, LIFO batch:0
DMA32 zone: 767976 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000
PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000
PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000
PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000
PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
PERCPU: Allocating 60064 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028785
Policy zone: Normal
Kernel command line: BOOT_IMAGE=Linux_Mandriva_Powerpack_2009_x root=UUID=02951f08-a1c5-11dd-aab8-7d23978eebb3 splash=silent vga=788
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2393.963 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4059560k/5242880k available (3156k kernel code, 134036k reserved, 1606k data, 556k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.92 BogoMIPS (lpj=23939630)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Hook version: 2.6.27-2.3 2008/08/29
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Early unpacking initramfs... done
Freeing initrd memory: 4001k freed
ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 12468546
Detected 12.468 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.94 BogoMIPS (lpj=23939748)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9575.87 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at f8000000 - fbffffff
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:19.0 reg 10 32bit mmio: [e8000000, e801ffff]
PCI: 0000:00:19.0 reg 14 32bit mmio: [e8020000, e8020fff]
PCI: 0000:00:19.0 reg 18 io port: [5000, 501f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [5020, 503f]
PCI: 0000:00:1a.1 reg 20 io port: [5040, 505f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [e8021000, e80213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [e8024000, e8027fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [5060, 507f]
PCI: 0000:00:1d.1 reg 20 io port: [5080, 509f]
PCI: 0000:00:1d.2 reg 20 io port: [50a0, 50bf]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [e8028000, e80283ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [50c0, 50cf]
PCI: 0000:00:1f.2 reg 24 io port: [50d0, 50df]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [e5000000, e5ffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [e6000000, e7ffffff]
PCI: 0000:01:00.0 reg 24 io port: [4000, 407f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:01.0 io port: [4000, 4fff]
PCI: bridge 0000:00:01.0 32bit mmio: [e5000000, e7ffffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:10:00.0 reg 10 64bit mmio: [e4000000, e4001fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [e4000000, e40fffff]
PCI: bridge 0000:00:1c.4 io port: [2000, 3fff]
PCI: bridge 0000:00:1c.4 32bit mmio: [e0000000, e3ffffff]
PCI: 0000:02:06.0 reg 10 32bit mmio: [e4100000, e4100fff]
pci 0000:02:06.0: supports D1
pci 0000:02:06.0: supports D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
PCI: 0000:02:06.1 reg 10 32bit mmio: [e4101000, e4101fff]
pci 0000:02:06.1: supports D1
pci 0000:02:06.1: supports D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.1: PME# disabled
PCI: 0000:02:06.2 reg 10 32bit mmio: [e4102000, e41027ff]
pci 0000:02:06.2: supports D1
pci 0000:02:06.2: supports D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.2: PME# disabled
PCI: 0000:02:06.3 reg 10 32bit mmio: [e4103000, e41030ff]
pci 0000:02:06.3: supports D1
pci 0000:02:06.3: supports D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.3: PME# disabled
PCI: 0000:02:06.4 reg 10 32bit mmio: [e4104000, e41040ff]
pci 0000:02:06.4: supports D1
pci 0000:02:06.4: supports D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [e4100000, e43fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609]
ACPI: Power Resource [C238] (on)
ACPI: Power Resource [C254] (on)
ACPI: Power Resource [C17C] (off)
ACPI: Power Resource [C362] (off)
ACPI: Power Resource [C365] (off)
ACPI: Power Resource [C366] (off)
ACPI: Power Resource [C367] (off)
ACPI: Power Resource [C368] (off)
ACPI: Power Resource [C369] (off)
ACPI: Power Resource [C382] (off)
ACPI: Power Resource [C383] (off)
ACPI: Power Resource [C384] (off)
ACPI: Power Resource [C385] (off)
ACPI: Power Resource [C386] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0b: ioport range 0x500-0x55f has been reserved
system 00:0b: ioport range 0x800-0x80f has been reserved
system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: ioport range 0x1000-0x107f has been reserved
system 00:0d: ioport range 0x1100-0x113f has been reserved
system 00:0d: ioport range 0x1200-0x121f has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
system 00:0e: iomem range 0xcd200-0xcffff has been reserved
system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x4000-0x4fff
pci 0000:00:01.0: MEM window: 0xe5000000-0xe7ffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
pci 0000:00:1c.4: IO window: 0x2000-0x3fff
pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0: IO window: 0x006000-0x0060ff
pci 0000:02:06.0: IO window: 0x006400-0x0064ff
pci 0000:02:06.0: PREFETCH window: 0xc4000000-0xc7ffffff
pci 0000:02:06.0: MEM window: 0xcc000000-0xcfffffff
pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04
pci 0000:02:06.1: IO window: 0x006800-0x0068ff
pci 0000:02:06.1: IO window: 0x006c00-0x006cff
pci 0000:02:06.1: PREFETCH window: 0xc8000000-0xcbffffff
pci 0000:02:06.1: MEM window: 0xec000000-0xefffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x6000-0x6fff
pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff
pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000cbffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [4000, 4fff]
bus: 01 index 1 mmio: [e5000000, e7ffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [e4000000, e40fffff]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 mmio: [0, 0]
bus: 28 index 0 io port: [2000, 3fff]
bus: 28 index 1 mmio: [e0000000, e3ffffff]
bus: 28 index 2 mmio: [0, 0]
bus: 28 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [6000, 6fff]
bus: 02 index 1 mmio: [e4100000, e43fffff]
bus: 02 index 2 mmio: [c4000000, cbffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
bus: 03 index 0 io port: [6000, 60ff]
bus: 03 index 1 io port: [6400, 64ff]
bus: 03 index 2 mmio: [c4000000, c7ffffff]
bus: 03 index 3 mmio: [cc000000, cfffffff]
bus: 04 index 0 io port: [6800, 68ff]
bus: 04 index 1 io port: [6c00, 6cff]
bus: 04 index 2 mmio: [c8000000, cbffffff]
bus: 04 index 3 mmio: [ec000000, efffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(1225839225.790:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7936
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20005100000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 556k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8021000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8028000
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: HP Integrated Module
usb 3-1: Manufacturer: Broadcom Corp
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27-server-0.rc8.2mnb uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: New USB device found, idVendor=06a3, idProduct=a503
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: GM3200 Laser Mouse
usb 7-1: Manufacturer: Saitek
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
ata1.00: ATA-8: FUJITSU MHW2160BJ G2, 8921, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 8921 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 sda6 sda7 > sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
ohci1394 0000:02:06.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e4102000-e41027ff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99291d3b10]
input: PS/2 Generic Mouse as /class/input/input3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: SSDT BFFDB84D, 02C1 (r1 HP Cpu0Ist 3000 INTL 20060317)
ACPI: SSDT BFFDBB93, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFFDB785, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
ACPI: SSDT BFFDBB0E, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:10:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
aes2501 probe !
num_altsetting == 1
BULK COUNT 2
BULK IN 0 ; size = 32
BULK OUT 1
aes2501: device now attached to aes2501-0
usbcore: registered new interface driver aes2501
Driver 'sr' needs updating - please use bus_type methods
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
input: Power Button (FF) as /class/input/input4
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
sr0: scsi3-mmc drive: 188x/188x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Clocksource tsc unstable (delta = -118847899 ns)
tpm_inf_pnp 00:03: Found C239 with ID IFX0102
tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
ppdev: user-space parallel port driver
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:29:7d:f2:b6
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input5
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
ricoh-mmc: Controller is now disabled.
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c5]
input: Saitek GM3200 Laser Mouse as /class/input/input6
ACPI: Sleep Button (CM) [C274]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C26E]
Yenta: ISA IRQ mask 0x0438, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c5]
ACPI: Battery Slot [C1F4] (battery present)
ACPI: Battery Slot [C1F3] (battery absent)
ACPI: AC Adapter [C1F2] (on-line)
ACPI: WMI: Mapper loaded
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ2] (60 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ3] (53 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ4] (32 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ5] (30 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ1] (62 C)
input,hidraw0: USB HID v1.10 Mouse [Saitek GM3200 Laser Mouse] on usb-0000:00:1d.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Yenta: ISA IRQ mask 0x0c38, PCI irq 17
Socket status: 30000810
Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20)
sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
ACPI: Transitioning device [C36A] to D3
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [C36A] (off)
ACPI: Transitioning device [C36B] to D3
fan PNP0C0B:01: registered as cooling_device3
ACPI: Fan [C36B] (off)
fan PNP0C0B:02: registered as cooling_device4
ACPI: Fan [C36C] (on)
fan PNP0C0B:03: registered as cooling_device5
ACPI: Fan [C36D] (on)
fan PNP0C0B:04: registered as cooling_device6
ACPI: Fan [C36E] (on)
ACPI: Transitioning device [C36F] to D3
fan PNP0C0B:05: registered as cooling_device7
ACPI: Fan [C36F] (off)
ACPI: Transitioning device [C387] to D3
fan PNP0C0B:06: registered as cooling_device8
ACPI: Fan [C387] (off)
ACPI: Transitioning device [C388] to D3
fan PNP0C0B:07: registered as cooling_device9
ACPI: Fan [C388] (off)
fan PNP0C0B:08: registered as cooling_device10
ACPI: Fan [C389] (on)
fan PNP0C0B:09: registered as cooling_device11
ACPI: Fan [C38A] (on)
fan PNP0C0B:0a: registered as cooling_device12
ACPI: Fan [C38B] (on)
acpi device:03: registered as cooling_device13
input: Video Bus as /class/input/input8
ACPI: Video Device [C14B] (multi-head: yes rom: no post: no)
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xe0000-0xfffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff
cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
pcmcia: registering new device pcmcia1.0
Uniform Multi-Platform E-IDE driver
Probing IDE interface ide0...
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ide0 at 0x6100-0x6107,0x610e on irq 17
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide0...
ide-cs: hda: Vpp = 0.0
Non-volatile memory driver v1.2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT3 FS on sda7, internal journal
fuse init (API version 7.9)
loop: module loaded
Adding 2208896k swap on /dev/sda6. Priority:-1 extents:1 across:2208896k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
firmware: requesting iwlwifi-4965-2.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: authenticate with AP de:93:26:ed:47:80
wlan0: authenticated
wlan0: associate with AP de:93:26:ed:47:80
wlan0: RX AssocResp from de:93:26:ed:47:80 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
ip6_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
elisa[6537]: segfault at 1b3a4140 ip 00007fa2baa1ba67 sp 00000000455a9e20 error 6 in libpulse.so.0.4.1[7fa2ba9e3000+4e000]
Il y a donc 2 erreurs :
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
elisa[6537]: segfault at 1b3a4140 ip 00007fa2baa1ba67 sp 00000000455a9e20 error 6 in libpulse.so.0.4.1[7fa2ba9e3000+4e000]
Et il est vrai que je regarde mes vidéos avec le centre multimédia de Mandriva qui s’appelle ELISA
à mon avis la 2nde erreur ne concerne que ce lecteur, et donc cela n'impacte pas les performances de mon pc je pense. Par contre la 1ère erreur m'a l'air plus grave, c'est peut etre de là que vient la cause de mon problème ?
Cela dit je ne sais pas comment la résoudre, peut etre que qq’un a une idée ?
[ PS : demain je travaille toute la journée donc peut etre que je ne répondrait pas tout de suite mais j’essaierai de regarder vos réponse au plus tot ]
j’ai réglé le problème venant de mon lecteur audio.
Il ne reste plus que le suivant, qui concerne l’ACPI apparement :
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Oula… ce programme est TRES bugge… autant l’eviter.
Si tes videos rament, c’est peut etre a cause de ce truc pas fini.
Vire ce package et essaye avec vlc ou totem
Oui il est effectivement possible que ce programme soit buggué KP2 mais le problème est résolu d’apres le “dmesg”
cela dit pour le dernier pb, celui de l’ACPI, je ne trouve rien sur le net pour m’aider. as tu une idée ?
Geo83 : pour l’ACPI : c’est un portable ?
La table DSDT participe à la restauration du système lorsque tu as fait un suspend to disk (veille prolongée)
C'est un tableau de donné du bios. Comme cette table est très souvent bogguée, on la réécrit virtuellement (=initramfs comme c'est le cas). dans certains cas comme lors d'un suspend to disk on a besoin d'en créer une virtuelle.
Ca peut être normal qu’il n’y en ait pas si tu fais un boot normal ou bien si le bios n’est pas boggué. En tout cas ça ne sert que lors de la phase de boot, donc si ça passe, tout va bien
Rebonjour,
Merci pour l’info v_atekor (oui c’est effectivement un pc portable ), je suis donc trankil avec les erreurs du coup, d’ailleurs en tournant sous Gnome j’ai remarqué que le système ramait beaucoup moins. cela dit c’est excellent d’avoir réglé tous ces problèmes précédents quand même.
Du coup je crois qu’on peut considérer ce sujet comme fini, et les problèmes comme résolus :p, merci à tous
Bonne soirée v_atekor, et encore merci 
Ca me fait penser à une autre source courante de problème:
Si vous avez un kde3 et aue ca rame, il faut penser à virer arts (le demon son de kde).
arts est 1) buggé 2) totalement inutile dans 99% des config.
Arts ? c’est vrai que sous Kde j’ai souvent eu des problèmes à cause du démon effectivement, je suis sous Kde 4.1 sur ma machine et j’ai beaucoup d’erreurs du démon, j’ai donc dû passer sous Gnome, je vais voir si je peux le désactiver pour tester.
Merci du conseil
Il y a pas mal de bug finalement sous Kde 4.1 avec mon pc. Je crois que je vais rester définitivement sous Gnome 2.24
Merci pour l’aide à tous.
Oui kde4.1 est encore un poil jeune…le 4.2 sort en janvier je crois…
4.1…ca ne peut pas être aussi bon que 3.5.10 sachant que tout a été réécrit.