Nouveau ATI Linux driver installer

alaink12 · Juin 11, 2005, 8:54

Salut à tous.
Voila j’ai téléchargé les derniers driver d’ATI et bonne surprise l’installeur simplifie fortement l’installation.
Ouvrir une console: se loguer en super user
et lancer :
[root@192 alain]# ./ati-driver-installer-8.14.13.run
Un petit reboot et c fini

Je suis sous Mandrake LE2005

newportable · Juin 11, 2005, 10:25

C’est une super nouvelle sauf que sur ma ubuntu j’ai

C’est dût à quoi???

newportable · Juin 11, 2005, 10:42

bon j’ai trouvé en fait fallait faire sh et pas ./
Mais maintenant j’ai pas d’accélération graphique voilà mon xorg.conf si ça peut vous aider

XF86Config-4 (XFree86 X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the XF86Config-4 manual page.

(Type "man XF86Config-4" at the shell prompt.)

This file is automatically updated on xserver-xfree86 package upgrades only

if it has not been modified since the last upgrade of the xserver-xfree86

package.

If you have edited this file but would like it to be automatically updated

again, run the following commands as root:

# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
#Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "v4l"
Load "vbe"
Load "xtt"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
Option "EmulateWheel"
Option "EmulateWheelButton" "9"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
EndSection

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "backingstore" "true"
Option "UseInternalAGPGART" "no"

### generic DRI settings

=== disable PnP Monitor ===

#Option "NoDDC"

=== disable/enable XAA/DRI ===

Option "no_accel" "no"
Option "no_dri" "no"

=== misc DRI settings ===

Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr

### FireGL DDX driver module specific settings

=== Screen Management ===

Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"

=== TV-out Management ===

Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x00000000"

=== OpenGL specific profiles/settings ===

Option "Capabilities" "0x00000000"

=== Video Overlay for the Xv extension ===

Option "VideoOverlay" "on"

=== OpenGL Overlay ===

Note: When OpenGL Overlay is enabled, Video Overlay

# will be disabled automatically
Option "OpenGLOverlay" "off"

=== Center Mode (Laptops only) ===

Option "CenterMode" "off"

=== Pseudo Color Visuals (8-bit visuals) ===

Option "PseudoColorVisuals" "off"

=== QBS Management ===

Option "Stereo" "off"
Option "StereoSyncEnable" "1"

=== FSAA Management ===

Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"

=== Misc Options ===

Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e50
Screen 0
EndSection

Section "Monitor"
Identifier "Écran générique"
HorizSync 30-75
VertRefresh 50-85
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Graphics Adapter"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

Amadeus_osa · Juin 11, 2005, 10:47

Le log?

mr_pouit · Juin 11, 2005, 10:56

t’es sûr qu’il faut laisser Load “glx” pour une ati ? :neutre:

hisvin · Juin 11, 2005, 11:10

Bon,chez moi,cela ne fonctionne pas.

e_nounours_1_1 · Juin 11, 2005, 11:24

Bah marche bien sur ma Gentoo
x11perf -putimagexy500 est toujours à 0,3 image par seconde :ane:

Sinon bah pas vraiment d’amélioration. Faudrait que je vérifie si composite coupe toujours la 3D !!! :ane:

hisvin · Juin 11, 2005, 11:30

Pour info,je tourne sur une fedora core 3 , kernel 2.6.10 ( ou 2.6.11.x selon mon humeur) + R9700 pro et Gcc 4.0 (Je précise vu que j’ai un doute.)
Le kernel et GCC étant compilé par mes soins. (Si l’on peut dire :ange: )

newportable · Juin 11, 2005, 11:31

quel log?

newportable · Juin 11, 2005, 11:32

Pourquoi?

e_nounours_1_1 · Juin 11, 2005, 11:40

Bon voilà, donc glxgears me donne 3660 sans l’option composite et 144 avec :ane:
Et CrystalGL ne fonctionne toujours pas :paf:

load glx est nécessaire sinon pas de 3D !! :oui:

Amadeus_osa · Juin 11, 2005, 11:44

Le log de Xorg


cat /var/log/Xorg.0.log

newportable · Juin 11, 2005, 11:48

RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
FireGL -* (R423 5552), MOBILITY RADEON X800 XT (M28 5D48),
MOBILITY FireGL V5100* (M28 5D49), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F),
RADEON - (RV410 5E52), RADEON - (RV410 5E53), RADEON - (RV410 5E55),
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(–) Chipset MOBILITY FireGL T2/T2e (M10/M11 4E54) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[6] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[7] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[8] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[9] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[10] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[18] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[19] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[20] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[21] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[23] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IXB
(II) fglrx(0): pEnt->device->identifier=0x82108e0
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[6] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[7] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[8] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[9] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[10] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[30] -1 0 0x00003000 - 0x000030ff (0x100) IXB
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
() fglrx(0): Depth 24, (–) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
() fglrx(0): Option "NoAccel" "no"
() fglrx(0): Option "NoDRI" "no"
() fglrx(0): Option "Capabilities" "0x00000000"
() fglrx(0): Option "GammaCorrectionI" "0x06419064"
() fglrx(0): Option "GammaCorrectionII" "0x00000000"
() fglrx(0): Option "OpenGLOverlay" "off"
() fglrx(0): Option "VideoOverlay" "on"
() fglrx(0): Option "DesktopSetup" "0x00000100"
() fglrx(0): Option "MonitorLayout" "AUTO, NONE"
() fglrx(0): Option "HSync2" "unspecified"
() fglrx(0): Option "VRefresh2" "unspecified"
() fglrx(0): Option "ScreenOverlap" "0"
() fglrx(0): Option "IgnoreEDID" "off"
() fglrx(0): Option "UseInternalAGPGART" "no"
() fglrx(0): Option "Stereo" "off"
() fglrx(0): Option "StereoSyncEnable" "1"
() fglrx(0): Option "UseFastTLS" "2"
() fglrx(0): Option "BlockSignalsOnLock" "on"
() fglrx(0): Option "ForceGenericCPU" "no"
() fglrx(0): Option "CenterMode" "off"
() fglrx(0): Option "FSAAScale" "1"
() fglrx(0): Option "FSAAEnable" "no"
() fglrx(0): Option "FSAADisableGamma" "no"
() fglrx(0): Option "FSAACustomizeMSPos" "no"
() fglrx(0): Option "FSAAMSPosX0" "0.000000"
() fglrx(0): Option "FSAAMSPosY0" "0.000000"
() fglrx(0): Option "FSAAMSPosX1" "0.000000"
() fglrx(0): Option "FSAAMSPosY1" "0.000000"
() fglrx(0): Option "FSAAMSPosX2" "0.000000"
() fglrx(0): Option "FSAAMSPosY2" "0.000000"
() fglrx(0): Option "FSAAMSPosX3" "0.000000"
() fglrx(0): Option "FSAAMSPosY3" "0.000000"
() fglrx(0): Option "FSAAMSPosX4" "0.000000"
() fglrx(0): Option "FSAAMSPosY4" "0.000000"
() fglrx(0): Option "FSAAMSPosX5" "0.000000"
() fglrx(0): Option "FSAAMSPosY5" "0.000000"
() fglrx(0): Option "NoTV" "yes"
() fglrx(0): Option "TVStandard" "NTSC-M"
() fglrx(0): Option "TVHSizeAdj" "0"
() fglrx(0): Option "TVVSizeAdj" "0"
() fglrx(0): Option "TVHPosAdj" "0"
() fglrx(0): Option "TVVPosAdj" "0"
() fglrx(0): Option "TVHStartAdj" "0"
() fglrx(0): Option "TVColorAdj" "0"
() fglrx(0): Option "PseudoColorVisuals" "off"
() fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
() fglrx(0): Gamma Correction for I is 0x06419064
() fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
() fglrx(0): Option "mtrr" "off"
(–) fglrx(0): Chipset: "MOBILITY FireGL T2/T2e (M10/M11 4E54)" (Chipset = 0x4e54)
(–) fglrx(0): (PciSubVendor = 0x1014, PciSubDevice = 0x054f)
(–) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(–) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(–) fglrx(0): MMIO registers at 0xc0100000
(–) fglrx(0): ChipExtRevID = 0x80
(–) fglrx(0): ChipIntRevID = 0x0C
(–) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType–1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1–Type AUTO, Monitor2–Type NONE

(II) fglrx(0): Primary head:
Monitor – LVDS
Connector – None
DAC Type – Unknown
TMDS Type – NONE
DDC Type – NONE
(II) fglrx(0): Secondary head:
Monitor – NONE
Connector – VGA
DAC Type – Primary
TMDS Type – NONE
DDC Type – VGA_DDC
(II) fglrx(0):
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: 1600x1200
(II) fglrx(0): Panel Size from BIOS: 1600x1200
() fglrx(0): PseudoColor visuals disabled
() fglrx(0): Overlay disabled
() fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
() fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1600x1200
(II) fglrx(0): Total 1 valid mode(s) found.
(–) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
() fglrx(0): *Mode “1600x1200”: 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline “1600x1200” 162.00 1600 1656 1848 2160 1200 1202 1205 1250
(++) fglrx(0): DPI set to (100, 100)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping “/usr/X11R6/lib/modules/libfb.a:fbmmx.o”: No symbols found
(II) Module fb: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
() fglrx(0): NoAccel = NO
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
() fglrx(0): FSAA Gamma enabled
() fglrx(0): FSAA Multisample Position is fix
() fglrx(0): NoDRI = NO
(II) Loading sub module “fglrxdrm”
(II) LoadModule: “fglrxdrm”
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor=“FireGL - ATI Technologies Inc.”
compiled for 4.3.99.902, module version = 8.8.25
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
() fglrx(0): Capabilities: 0x00000000
() fglrx(0): cpuFlags: 0x8000001d
() fglrx(0): cpuSpeedMHz: 0x00000257
(==) fglrx(0): OpenGL ClientDriverName: “fglrx_dri.so”
() fglrx(0): using built in AGPGART module: no
() fglrx(0): UseFastTLS=2
() fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xc0100000 - 0xc010ffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[3] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[8] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[9] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[10] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[11] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[12] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[13] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[24] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[25] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[26] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[27] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[28] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[29] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[30] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[31] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[32] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[33] -1 0 0x00003000 - 0x000030ff (0x100) IXB
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xe0954000 (size=0x076ac000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ‘’
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created “fglrx” driver at busid “PCI:1:0:0”
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d23000
(II) fglrx(0): [drm] mapped SAREA 0xf8d23000 to 0xb7db0000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.8.25
(II) fglrx(0): Date: Jan 14 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.10-5-686
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel SMP: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xc0100000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] grafics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0xf8e81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x00954000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
() fglrx(0): Option “BackingStore” “true”
() fglrx(0): Backing store enabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600 x 320
() Option “dpms”
() fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
() Generic Keyboard: Core Keyboard
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xfree86”
() Generic Keyboard: XkbRules: “xfree86”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “CustomKeycodes” “off”
() Generic Keyboard: CustomKeycodes disabled
() Option “Protocol” “ImPS/2”
() Configured Mouse: Device: “/dev/input/mice”
() Configured Mouse: Protocol: “ImPS/2”
() Option “CorePointer”
() Configured Mouse: Core Pointer
() Option “Device” “/dev/input/mice”
() Option “Emulate3Buttons” “true”
() Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Option “ZAxisMapping” “4 5”
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Option “EmulateWheel”
() Option “EmulateWheelButton” “9”
(==) Configured Mouse: YAxisMapping: buttons 4 and 5
() Configured Mouse: EmulateWheel, EmulateWheelButton: 9, EmulateWheelInertia: 10
() Configured Mouse: Buttons: 5
(II) Synaptics touchpad driver version 0.13.6
(–) Synaptics Touchpad auto-dev sets device to /dev/input/event1
() Option “Device” “/dev/input/event1”
(–) Synaptics Touchpad synaptics touchpad found
() Option “SendCoreEvents” “true”
() Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device “Synaptics Touchpad” (type: MOUSE)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(–) Synaptics Touchpad synaptics touchpad found
Warning: font renderer for “.pcf” already registered at priority 0
Warning: font renderer for “.pcf.Z” already registered at priority 0
Warning: font renderer for “.pcf.gz” already registered at priority 0
Warning: font renderer for “.snf” already registered at priority 0
Warning: font renderer for “.snf.Z” already registered at priority 0
Warning: font renderer for “.snf.gz” already registered at priority 0
Warning: font renderer for “.bdf” already registered at priority 0
Warning: font renderer for “.bdf.Z” already registered at priority 0
Warning: font renderer for “.bdf.gz” already registered at priority 0
Warning: font renderer for “.pmf” already registered at priority 0
Could not init font path element unix/:7100, removing from list!
Could not init font path element /usr/lib/X11/fonts/Speedo, removing from list!

newportable · Juin 11, 2005, 12:09

mais j’ai remis les drivers fglrx normaux :ane:
Je t’en refait un avec les nouveaux ati

Amadeus_osa · Juin 11, 2005, 12:10

Tu devrais avoir l’accélération graphique, il n’y a pas d’erreur particulière! :neutre:


(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled

newportable · Juin 11, 2005, 12:12

bon voila le log

FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(–) Chipset MOBILITY FireGL T2/T2e (M10/M11 4E54) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[6] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[7] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[8] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[9] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[10] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[18] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[19] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[20] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[21] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[23] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IXB
(II) fglrx(0): pEnt->device->identifier=0x82108e0
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[6] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[7] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[8] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[9] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[10] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[26] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[29] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[30] -1 0 0x00003000 - 0x000030ff (0x100) IXB
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
() fglrx(0): Depth 24, (–) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
() fglrx(0): Option "NoAccel" "no"
() fglrx(0): Option "NoDRI" "no"
() fglrx(0): Option "Capabilities" "0x00000000"
() fglrx(0): Option "GammaCorrectionI" "0x06419064"
() fglrx(0): Option "GammaCorrectionII" "0x00000000"
() fglrx(0): Option "OpenGLOverlay" "off"
() fglrx(0): Option "VideoOverlay" "on"
() fglrx(0): Option "DesktopSetup" "0x00000100"
() fglrx(0): Option "MonitorLayout" "AUTO, NONE"
() fglrx(0): Option "HSync2" "unspecified"
() fglrx(0): Option "VRefresh2" "unspecified"
() fglrx(0): Option "ScreenOverlap" "0"
() fglrx(0): Option "IgnoreEDID" "off"
() fglrx(0): Option "UseInternalAGPGART" "no"
() fglrx(0): Option "Stereo" "off"
() fglrx(0): Option "StereoSyncEnable" "1"
() fglrx(0): Option "UseFastTLS" "2"
() fglrx(0): Option "BlockSignalsOnLock" "on"
() fglrx(0): Option "ForceGenericCPU" "no"
() fglrx(0): Option "CenterMode" "off"
() fglrx(0): Option "FSAAScale" "1"
() fglrx(0): Option "FSAAEnable" "no"
() fglrx(0): Option "FSAADisableGamma" "no"
() fglrx(0): Option "FSAACustomizeMSPos" "no"
() fglrx(0): Option "FSAAMSPosX0" "0.000000"
() fglrx(0): Option "FSAAMSPosY0" "0.000000"
() fglrx(0): Option "FSAAMSPosX1" "0.000000"
() fglrx(0): Option "FSAAMSPosY1" "0.000000"
() fglrx(0): Option "FSAAMSPosX2" "0.000000"
() fglrx(0): Option "FSAAMSPosY2" "0.000000"
() fglrx(0): Option "FSAAMSPosX3" "0.000000"
() fglrx(0): Option "FSAAMSPosY3" "0.000000"
() fglrx(0): Option "FSAAMSPosX4" "0.000000"
() fglrx(0): Option "FSAAMSPosY4" "0.000000"
() fglrx(0): Option "FSAAMSPosX5" "0.000000"
() fglrx(0): Option "FSAAMSPosY5" "0.000000"
() fglrx(0): Option "NoTV" "yes"
() fglrx(0): Option "TVStandard" "NTSC-M"
() fglrx(0): Option "TVHSizeAdj" "0"
() fglrx(0): Option "TVVSizeAdj" "0"
() fglrx(0): Option "TVHPosAdj" "0"
() fglrx(0): Option "TVVPosAdj" "0"
() fglrx(0): Option "TVHStartAdj" "0"
() fglrx(0): Option "TVColorAdj" "0"
() fglrx(0): Option "PseudoColorVisuals" "off"
() fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
() fglrx(0): Gamma Correction for I is 0x06419064
() fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
() fglrx(0): Option "mtrr" "off"
(–) fglrx(0): Chipset: "MOBILITY FireGL T2/T2e (M10/M11 4E54)" (Chipset = 0x4e54)
(–) fglrx(0): (PciSubVendor = 0x1014, PciSubDevice = 0x054f)
(–) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(–) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(–) fglrx(0): MMIO registers at 0xc0100000
(–) fglrx(0): ChipExtRevID = 0x80
(–) fglrx(0): ChipIntRevID = 0x0C
(–) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType–1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1–Type AUTO, Monitor2–Type NONE

(II) fglrx(0): Primary head:
Monitor – LVDS
Connector – None
DAC Type – Unknown
TMDS Type – NONE
DDC Type – NONE
(II) fglrx(0): Secondary head:
Monitor – NONE
Connector – VGA
DAC Type – Primary
TMDS Type – NONE
DDC Type – VGA_DDC
(II) fglrx(0):
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: 1600x1200
(II) fglrx(0): Panel Size from BIOS: 1600x1200
() fglrx(0): PseudoColor visuals disabled
() fglrx(0): Overlay disabled
() fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
() fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1600x1200
(II) fglrx(0): Total 1 valid mode(s) found.
(–) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
() fglrx(0): *Mode “1600x1200”: 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline “1600x1200” 162.00 1600 1656 1848 2160 1200 1202 1205 1250
(++) fglrx(0): DPI set to (100, 100)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping “/usr/X11R6/lib/modules/libfb.a:fbmmx.o”: No symbols found
(II) Module fb: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
() fglrx(0): NoAccel = NO
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=“X.Org Foundation”
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
() fglrx(0): FSAA Gamma enabled
() fglrx(0): FSAA Multisample Position is fix
() fglrx(0): NoDRI = NO
(II) Loading sub module “fglrxdrm”
(II) LoadModule: “fglrxdrm”
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor=“FireGL - ATI Technologies Inc.”
compiled for 6.8.0, module version = 8.14.13
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
() fglrx(0): Capabilities: 0x00000000
() fglrx(0): cpuFlags: 0x8000001d
() fglrx(0): cpuSpeedMHz: 0x00000257
(==) fglrx(0): OpenGL ClientDriverName: “fglrx_dri.so”
() fglrx(0): using built in AGPGART module: no
() fglrx(0): UseFastTLS=2
() fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xc0100000 - 0xc010ffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[3] -1 0 0x00100000 - 0x3fefffff (0x3fe00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xc0210000 - 0xc0210fff (0x1000) MX[B]
[8] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[9] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[10] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[11] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[12] -1 0 0x3ff79000 - 0x3ff793ff (0x400) MX[B]
[13] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xc0100000 - 0xc010ffff (0x10000) MXB
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] 0 0 0x00003000 - 0x000030ff (0x100) IX[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[24] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[25] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[26] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[27] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[28] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[29] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[30] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[31] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[32] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[33] -1 0 0x00003000 - 0x000030ff (0x100) IXB
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xe0954000 (size=0x076ac000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ‘’
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created “fglrx” driver at busid “PCI:1:0:0”
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d1f000
(II) fglrx(0): [drm] mapped SAREA 0xf8d1f000 to 0xb7daa000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.8.25
(II) fglrx(0): Date: Jan 14 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does not match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8d1f000 at 0xb7daa000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
() fglrx(0): Option “BackingStore” “true”
() fglrx(0): Backing store enabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600 x 6988
() Option “dpms”
() fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
() fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
() Generic Keyboard: Core Keyboard
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xfree86”
() Generic Keyboard: XkbRules: “xfree86”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “CustomKeycodes” “off”
() Generic Keyboard: CustomKeycodes disabled
() Option “Protocol” “ImPS/2”
() Configured Mouse: Device: “/dev/input/mice”
() Configured Mouse: Protocol: “ImPS/2”
() Option “CorePointer”
() Configured Mouse: Core Pointer
() Option “Device” “/dev/input/mice”
() Option “Emulate3Buttons” “true”
() Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Option “ZAxisMapping” “4 5”
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Option “EmulateWheel”
() Option “EmulateWheelButton” “9”
(==) Configured Mouse: YAxisMapping: buttons 4 and 5
() Configured Mouse: EmulateWheel, EmulateWheelButton: 9, EmulateWheelInertia: 10
() Configured Mouse: Buttons: 5
(II) Synaptics touchpad driver version 0.13.6
(–) Synaptics Touchpad auto-dev sets device to /dev/input/event1
() Option “Device” “/dev/input/event1”
(–) Synaptics Touchpad synaptics touchpad found
() Option “SendCoreEvents” “true”
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device “Synaptics Touchpad” (type: MOUSE)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(–) Synaptics Touchpad synaptics touchpad found
Warning: font renderer for “.pcf” already registered at priority 0
Warning: font renderer for “.pcf.Z” already registered at priority 0
Warning: font renderer for “.pcf.gz” already registered at priority 0
Warning: font renderer for “.snf” already registered at priority 0
Warning: font renderer for “.snf.Z” already registered at priority 0
Warning: font renderer for “.snf.gz” already registered at priority 0
Warning: font renderer for “.bdf” already registered at priority 0
Warning: font renderer for “.bdf.Z” already registered at priority 0
Warning: font renderer for “.bdf.gz” already registered at priority 0
Warning: font renderer for “.pmf” already registered at priority 0
Could not init font path element unix/:7100, removing from list!
Could not init font path element /usr/lib/X11/fonts/Speedo, removing from list!

et le glxinfo

adrien@ubuntu:~ $ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
GLX_ATI_render_texture
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat

0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 1 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 1 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 1 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 1 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 1 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 1 0 None

Amadeus_osa · Juin 11, 2005, 12:13

Et que donne un glxinfo ?

Amadeus_osa · Juin 11, 2005, 12:20


(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8d1f000 at 0xb7daa000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)            *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

En gros le module fglrx ne correspond pas au kernel.

Quel distrib?

newportable · Juin 11, 2005, 12:52

ubuntu hoary

Googler · Juin 11, 2005, 12:55

Tu fais pas de fglrxconfig? :heink: