l’appli console de folding@home… Faut l’ouvrir à chaque démarrage et la laisser ouverte tout le temps dans la barre de tâche ? :heink:
Qu’est ce qui est bien dans la version graphique ?Ca occupe beaucoup de place en mémoire ?
EMIII occuope 5512ko de ram
les deux F@H.exe occupent à eux deux 8600ko
(explorer en bouffe 42Mo [:phil512])
phil> bah tout a l’air de tourner comme une horloge 
kevinz> bah oui elle doit toujours être ouverte … sinon ca calcule pas ! :o
parfait
Petite question : j’ai eu le probleme, il y a peu de temps, d’envoit de resultat ( j’avais plusieurs calcul en attente ).
Qu’est ce qu’il faut faire pour que ca envoye de nouveau?
Merci.
Voila, 8eme pour un ch’tit moment, je me lance a la poursuite de Lordotha :sol:
j’ai depasser le cap des 4000pts ia kelks jours 
il me faut deja 30 min pour un WU de 30pts avec mon P3 600 !! Alors avec une de 160 … :fou:
merci
non, mais s’aurait été plus pratique qu’il se lance à chaque démarrage et qu’il se place discrètement dans la barre de tâches…
Je vais devoir le faire manuellement…
euh vous avez plusieurs pc pour faire autant de points par jour ? ou vos processeurs tournent a 10ghz ?
deux 2400+, un celeron 1800 et un PII 266Mhz 
Et une facture d’électricité aussi :oui: [:nexath]
Moi, on est a 6 ou 7 PC mais seulement 2 tourne a donf …
:super:
moi j’en ai qu’un… voir la config [:delphes]
moi aussi j’en ai qu’un
barton @2.3ghz
Je comprends maintenant pourquoi j’ai fait plus de 300WU en quelques semaines :ouch:
en fait mon proc est pas du tout stable :ouch: :ouch:
Je vais baisser la ram je crois :ange:
[fixed][11:10:01] Simulation instability has been encountered.
The run has entered a
[11:10:01] state from which no further progress can be made.
[11:10:01] If you often see other project units terminating early like this
[11:10:01] too, you may wish to check the stability of your computer (issues
[11:10:01] such as high temperature, overclocking, etc.).
[11:10:01] Going to send back what have done.
[11:10:01] logfile size: 9616
[11:10:01] - Writing 10179 bytes of core data to disk…
[11:10:01] … Done.
[11:10:01]
[11:10:01] Folding@home Core Shutdown: EARLY_UNIT_END
[11:10:04] CoreStatus = 72 (114)
[11:10:04] Sending work to server
[11:10:04] + Attempting to send results
[11:10:06] + Results successfully sent
[11:10:06] Thank you for your contribution to Folding@home.
[11:10:10] + Attempting to get work packet
[11:10:10] - Connecting to assignment server
[11:10:11] - Successful: assigned to (171.64.122.123).
[11:10:11] + News From Folding@Home: Welcome to Folding@Home
[11:10:12] Loaded queue successfully.
[11:10:21] + Closed connections
[11:10:26]
[11:10:26] + Processing work unit
[11:10:26] Core required: FahCore_78.exe
[11:10:26] Core found.
[11:10:26] Working on Unit 03 [March 22 11:10:26]
[11:10:26] + Working …
[11:10:27]
[11:10:27] ------------------------------
[11:10:27] Folding@home Gromacs Core
[11:10:27] Version 1.53 (October 2, 2003)
[11:10:27]
[11:10:27] Preparing to commence simulation
[11:10:27] - Looking at optimizations…
[11:10:27] - Created dyn
[11:10:27] - Files status OK
[11:10:27] - Go method
[11:10:27] - Expanded 406752 -> 2483231 (decompressed 610.5 percent)
[11:10:27] - Starting from initial work packet
[11:10:27]
[11:10:27] Project: 563 (Run 299, Clone 4, Gen 92)
[11:10:27]
[11:10:27] Assembly optimizations on if available.
[11:10:27] Entering M.D.
[11:10:39] Protein: p563_BBA5_ext
[11:10:39]
[11:10:39] Writing local files
[11:10:39] Extra SSE boost OK.
[11:10:44] Writing local files
[11:10:46] Completed 0 out of 250000 steps (0)
[11:11:52] Quit 101 - Fatal error:
[11:11:52] Step 542, time 1.084 (ps) LINCS WARNING
[11:11:52] relative constraint deviation after LINCS:
[11:11:52] max 0.000000 (between atoms 1 and 2) rms 1.#QNAN0
[11:11:52]
[11:11:52] Simulation instability has been encountered. The run has entered a
[11:11:52] state from which no further progress can be made.
[11:11:52] If you often see other project units terminating early like this
[11:11:52] too, you may wish to check the stability of your computer (issues
[11:11:52] such as high temperature, overclocking, etc.).
[11:11:52] Going to send back what have done.
[11:11:52] logfile size: 8460
[11:11:52] - Writing 9133 bytes of core data to disk…
[11:11:52] … Done.
[11:11:52]
[11:11:52] Folding@home Core Shutdown: EARLY_UNIT_END
[11:11:55] CoreStatus = 72 (114)
[11:11:55] Sending work to server
[11:11:55] + Attempting to send results
[11:11:57] + Results successfully sent
[11:11:57] Thank you for your contribution to Folding@home.
[11:12:01] + Attempting to get work packet
[11:12:01] - Connecting to assignment server
[11:12:02] - Successful: assigned to (171.64.122.123).
[11:12:02] + News From Folding@Home: Welcome to Folding@Home
[11:12:02] Loaded queue successfully.
[11:12:12] + Closed connections
[11:12:17]
[11:12:17] + Processing work unit
[11:12:17] Core required: FahCore_78.exe
[11:12:17] Core found.
[11:12:17] Working on Unit 04 [March 22 11:12:17]
[11:12:17] + Working …
[11:12:17]
[11:12:17] ------------------------------
[11:12:17] Folding@home Gromacs Core
[11:12:17] Version 1.53 (October 2, 2003)
[11:12:17]
[11:12:17] Preparing to commence simulation
[11:12:17] - Looking at optimizations…
[11:12:17] - Created dyn
[11:12:17] - Files status OK
[11:12:17] - Go method
[11:12:18] - Expanded 406106 -> 2483231 (decompressed 611.4 percent)
[11:12:18] - Starting from initial work packet
[11:12:18]
[11:12:18] Project: 563 (Run 4, Clone 5, Gen 106)
[11:12:18]
[11:12:18] Assembly optimizations on if available.
[11:12:18] Entering M.D.
[11:12:30] Protein: p563_BBA5_ext
[11:12:30]
[11:12:30] Writing local files
[11:12:30] Extra SSE boost OK.
[11:12:34] Writing local files
[11:12:36] Completed 0 out of 250000 steps (0)
[11:17:44] Writing local files
[11:17:46] Completed 2500 out of 250000 steps (1)
[11:22:54] Writing local files
[11:22:56] Completed 5000 out of 250000 steps (2)
[11:28:05] Writing local files
[11:28:07] Completed 7500 out of 250000 steps (3)
[11:33:15] Writing local files
[11:33:17] Completed 10000 out of 250000 steps (4)
[11:38:25] Writing local files
[11:38:27] Completed 12500 out of 250000 steps (5)
[11:42:36] Quit 101 - Fatal error:
[11:42:36] Step 14512, time 29.024 (ps) LINCS WARNING
[11:42:36] relative constraint deviation after LINCS:
[11:42:36] max 0.000000 (between atoms 1 and 2) rms 1.#QNAN0
[11:42:36]
[11:42:36] Simulation instability has been encountered. The run has entered a
[11:42:36] state from which no further progress can be made.
[11:42:36] If you often see other project units terminating early like this
[11:42:36] too, you may wish to check the stability of your computer (issues
[11:42:36] such as high temperature, overclocking, etc.).
[11:42:36] Going to send back what have done.
[11:42:36] logfile size: 9533
[11:42:36] - Writing 10209 bytes of core data to disk…
[11:42:36] … Done.
[11:42:36]
[11:42:36] Folding@home Core Shutdown: EARLY_UNIT_END
[11:42:39] CoreStatus = 72 (114)
[11:42:39] Sending work to server
[/fixed]
non, en fait je vais monter le voltage [:penner]
J’ai quitté F@H à l’instant précis où il mettait un point de sauvegarde sur ma WU à 160 points.
Checkpoint corrompu, je dois tout recommencer [:colere2]
C moche…
La BH-5, ça siouxxe [:gueule2con]