http://www.the-asw.com/articles/2004/05/17…er-la-sortie-tv
regarde si tu peux rien faire avec…
par ailleurs, as-tu lu:
voir APPENDIX J: CONFIGURING TV-OUT dans le README des drivers
dans les pilotes proprio nvidia? Il semblerait qu’il y ait des infos. :paf:
Pour ma part, je ne peux t’en dire plus, une sortie TV n’a pas d’interet pour moi, j’ai pas de TV… :ane: Aussi, j’ai pas éssayé… :whistle:
rem: mais je vois que dans totem dans gnome, j’ai l’option sortie TV dxr3 qui apparait en dégrisé…
je tombe sur sa : http://www.phoronix.com/scan.php?page=article&item=552&num=1 jme fais c’est ce qu’il me faut pour ma sorti TV je m’enpresse de l’install je quite gnome je l’install hop startx sa marche nikelll et je reboot et paf le serverX se lance pas ! j’ai refais l’install ( toujours en desinstallant avan ) au moins 5 fois j’ai comparé les xorg.conf quand sa march que je suis sous gnome et ceux apres le reboot quand sa marche pas il sont identique ! donc voila je m’en remet a vous spécialiste
en attendant j’ai réinstallé les anciens que j’avais ( les 1.0.8774 )
bon j’ai tester quelque chose ça marche un petit peu mieux facon de parler j’ai que l’image sur la tv le crt il l’éteind automatiquement lorsque je fait startx de plus l’image est en noir et blanc mais demain je cherche le cable pour me mettre en s-video ( parceque le composite ma carte a jamais bp aimé )
donc voici mon xorg :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 131072
Option "TwinView"
Option "SecondMonitorHorizSync" "30-38"
Option "SecondMonitorVertRefresh" "50-100"
Option "TwinViewOrientation" "Below"
Option "MetaModes" "1152x864, 800x600; 1152x864, NULL"
Option "ConnectedMonitor" "crt, tv"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-49
VertRefresh 43-72
EndSection
Section "Monitor"
Identifier "tv"
HorizSync 28-49
VertRefresh 43-72
EndSection
Section "Screen"
Identifier "Principal"
Device "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Secondaire"
Device "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Monitor "tv"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Principal"
Screen "Secondaire"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
pour la ligne Screen “Secondaire” dans ServeurLayout j’ai essayer de mettre :
Screen "Secondaire"RightOf"Principal"
pour tester mais il me mettait NO screen found quand je fesais startx
tu peux tenter la beta du driver nvidia (version 9xxx) le module ‘nvidia-setting’ intègre une option pour activer la sortie télé en mode clone ‘à chaud’
malheureusement, ce driver ne marche pas chez moi, mais tente quand même, il a l’air de marcher chez pas mal de gens.