[Résolu]Pb gravure avec nero 6.6.0.6 "une initialisation est survenue"

Voila tout est dans le titre.

Impossible de graver avec mon graveur tout neuf.

Il est monter dans un boitier externe spécial USB2. Il est bien reconnu par windows et par Nero.

voici ma log si quelqu’un peut m’aider.

[cpp]


Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 21/12/2003 05:27:00
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30
Nero Version: 6.6.0.6
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 1 ID 0 DMA: On
DiskPeripheral : O2Micro MemoryCardBus Flash atapi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520A H: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047920kB)
Free physical memory: 550MB (563208kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.2.2005
Compilation UDF/ISO
23:29:15 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

23:29:15 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

23:29:15 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

23:29:15 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

23:29:15 #5 Text 0 File Reader.cpp, Line 127
Reader running

23:29:15 #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520A running

23:29:15 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

23:29:15 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

23:29:15 #9 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using DVD media

23:29:15 #10 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2102639 (467:15.14, 4106MB)

23:29:15 #11 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD DVD)

23:29:15 #12 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

23:29:15 #13 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:29:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2102640 (2102640) = #2102640/467:15.15
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2102640 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------

23:29:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4306206720, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2102640 | lead-out | 1 | 0x41 | 0x00

23:29:15 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

23:29:15 #17 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

23:29:15 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

23:29:15 #19 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

23:29:15 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:31:57 #21 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3520A > start writing Lead-Out at LBA 2102640 (201570h), lenght 0 blocks

23:31:57 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:31:57 #23 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 18,9x (26 082 Ko/s)

23:31:57 #24 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5 540 Ko/s)

23:31:57 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:31:57 #26 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

23:31:57 #27 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON

23:31:57 #28 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

23:31:57 #29 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

23:31:57 #30 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2

23:31:57 #31 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AC0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

23:31:57 #32 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2

23:31:57 #33 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2

23:31:57 #34 Text 0 File DVDR.cpp, Line 5094
Drive: _NEC DVD_RW ND-3520A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

23:31:58 #35 Text 0 File Cdrdrv.cpp, Line 1284
23:31:58.034 - _NEC DVD_RW ND-3520A\H1 T0 : Queue again later

23:31:59 #36 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x043C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

23:32:00 #37 SCSI -1114 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AE0C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

23:32:00 #38 CDR -1114 File Writer.cpp, Line 311
Reset occurred

23:32:00 #39 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:32:00 #40 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

23:32:00 #41 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was -1

23:32:00 #42 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2

23:32:00 #43 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2

23:32:00 #44 Text 0 File DVDR.cpp, Line 5094
Drive: _NEC DVD_RW ND-3520A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4

23:32:00 #45 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5 540 Ko/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 21/12/2003 05:26:58

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[/cpp]

As tu essayé ton graveur directement sur un port SCSI pour voir si le probleme ne venait pas de l’USB??

Ensuite, pour graver avec un graveur de DVD il te faut un taux de transfert tres élevé, ce que n’a pas l’USB.
Apres l’essai sur ton port SCSI, et si cela ne marche pas, réinstall le Service pack 2 de Win XP.

Check supported media : Disabled >> a mettre en enable

DiskPeripheral : O2Micro MemoryCardBus Flash atapi Port 2 ID 0 DMA: Off >> mettre en on

C’est de l’usb 2 et puis de l’ide pas du scsi.

Mais le boitier été vendu compatible avec les graveurs DVD

Pourquoi tu indique l’SCSI dans le device map ??

Scsi-Device-Map

Moi j’indique rien c’est la log de nero 6.6.0.6

Bon, OK mais en IDE, il fonctionne bien ?

Bon ben le problème est résolu.

tout vient de mon boitier USB2.

J’ai branché le graveur en IDE et 2 DVD OK.

Tant pis pour la portabilité.