Forum Clubic

Problème gravure dvd+rw avec nero - qui peu m'aider à lire décripter ce log

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:20:56
ahead WinASPI: File ‘C:\Program Files\Ahead\nero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 18:33:44
Version de Nero : 6.3.1.20
Graveur : <SONY DVD+RW DW-P50A> Version: 1.8f - HA 1 TA 0 - 6.3.1.20
Pilote d’adaptateur :<atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <SONY DVD+RW DW-P50A >Version: 1.8f - HA 1 TA 0 - 6.3.1.20
Pilote d’adaptateur :<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2040AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+RW DW-P50A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD+RW DW-P50A D: CDRom0

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 32505856 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 190MB (195568kB)
Free physical memory: 43MB (44340kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.9.2005
Compilation ISO
20:43:27 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:43:28 #2 Text 0 File Reader.cpp, Line 126
Reader running

20:43:28 #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD+RW DW-P50A running

20:43:28 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

20:43:28 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disque entier, using DVD media

20:43:29 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 358175 ( 79:35.50, 699MB)

20:43:29 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

20:43:29 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD+RW DW-P50A, Media type: DVD+RW
Disc Manufacturer ID: PHILIPS, Media Type ID: 041, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

20:43:29 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:43:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 358176 (358176) = #358176/79:35.51
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358176 blocks [SONY DVD+RW DW-P50A ]
--------------------------------------------------------------

20:43:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD+RW DW-P50A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 733544448, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
358176 | lead-out | 1 | 0x00 | 0x41

20:43:31 #12 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers

20:43:31 #13 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

20:43:31 #14 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé

20:43:31 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 1x (1 385 Ko/s)

20:43:32 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:43:32 #17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: PHILIPS.
Media type ID: 041
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16…63]:
00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 …PHILIPS.041.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #…|\.(…~p.(…{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(…

20:43:32 #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 10:34,145 (634145ms) -> OK

20:43:32 #19 Phase 98 File dlgbrnst.cpp, Line 1855
Démarrer le formatage du disque avant la gravure

20:44:16 #20 Phase 100 File dlgbrnst.cpp, Line 1855
Formatage du disque terminé

20:44:16 #21 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: No

20:44:22 #22 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03ED0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x10
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x10

20:44:22 #23 CDR -1046 File Writer.cpp, Line 304
Disque non valable

20:44:22 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:44:22 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

20:44:24 #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

20:44:24 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

20:44:24 #28 Phase 38 File dlgbrnst.cpp, Line 1855
La gravure a échoué à 1x (1 385 Ko/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 09:53:02
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

edit modo, j’ai retiré le sérial

c’est bien beau tout ça…mais on est sensé en faire quoi ?

PS: Merci pour ton numero de serie :sarcastic:. Y’en a pleins qui seront content de trouver dans ton message un serial Valide pour une Nero 6.3.1.20

Depeche toi d’enlever ça de ton message :ange:

Si ton graveur peut graver plus vite, essaye en 4x

J’avais ce soucis avec des princo 1x … ça plantait, alors qu’en gravant en 4x no soucis … http://perso.wanadoo.fr/atil/forum/bah.gif

Je te redirige vers un forum plus approprié: logiciel/général :wink:

Merci pour ta patience :jap:

Salut,

Essaye de réinstaller les drivers ASPI.
Sinon, verifie le firmware de ton graveur et le mode de transfert de tes IDE dans le gestionnaire de périphérique. Il doit être en DMA ou UDMA.

merci mais ça marche comment? pour trouver les IDE puis le DMAouUDMA?
le firware je supose que c’est la signature numérique des driver 2 ne sont pas signés.