Bonjour
Merci pour les réponses
Mon alim est : ATX-5000 .
Voilà le résultat du petit logiciel : (merci de me dire si c’est suffisant)
CPUID HWMonitor Report
Binaries
HWMonitor version 1.2.5.0
Monitoring
Mainboard Model P8H61-M LX (0x00000275 - 0x16720F80)
LPCIO
LPCIO Vendor Nuvoton
LPCIO Model NCT6776
LPCIO Vendor ID 0x5CA3
LPCIO Chip ID 0xC3
LPCIO Revision ID 0x33
Config Mode I/O address 0x2E
Config Mode LDN 0xB
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 FF FF 00 FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 FF FF FF FF FF FF FF FF FF FF C8 86 83 00 FF FF
20 C3 33 FF 00 20 00 00 40 00 FF 20 08 80 00 00 03
30 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Register space LPC, base address = 0x0290
Hardware Monitors
Hardware monitor Nuvoton NCT6776
Voltage 0 0.80 Volts [0x64] (CPU VCORE)
Voltage 1 1.01 Volts [0x7E] (VIN1)
Voltage 2 3.39 Volts [0xD4] (AVCC)
Voltage 3 3.39 Volts [0xD4] (3VCC)
Voltage 4 1.02 Volts [0x7F] (VIN4)
Voltage 6 1.14 Volts [0x8F] (VIN6)
Temperature 0 33°C (91°F) [0x21] (SYSTIN)
Temperature 1 90°C (193°F) [0xB3] (CPUTIN)
Temperature 2 51°C (122°F) [0x65] (AUXTIN)
Temperature 3 22°C (71°F) [0x16] (TMPIN3)
Fan 0 861 RPM [0x35D] (SYSFANIN)
Fan 1 1028 RPM [0x404] (CPUFANIN)
Hardware registers
Register space LPC, base address = 0x0290
bank 0
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 04 FF 04 38 00 FF FF FF FF FF FF FF FF FF FF FF
10 04 FF 00 FF 38 FF FF FF 50 00 00 00 00 84 00 00
20 66 7D D4 D3 7F FF 8F 21 FF FF FF DA 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF FF
40 01 00 4F DF FF A8 3F FF 2D FF FF FF 10 05 00 A3
50 FF FF FF FF FF FF FF FF C1 FF FF FF FF 01 00 FF
60 AA FF FF FF FF 01 07 FF FF FF FF FF FF FF FF FF
70 00 0A 00 16 80 16 80 16 80 FF FF FF FF FF FF FF
80 FF 03 1F 0F FF 3C 3C 3C 00 00 00 00 00 00 00 00
90 0A 00 00 00 00 0A 0A 0A 0A AA EF 80 FF 40 46 C4
A0 0E 01 00 00 FF 00 00 FF 00 00 80 66 66 06 01 01
B0 00 00 00 00 00 00 2B 00 1C 00 00 09 00 00 C4 FF
C0 01 00 00 00 00 00 00 00 00 08 02 FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 1
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 2
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 3
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 4
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 5
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 6
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 7
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Processors
Number of processors 1
Number of threads 4
APICs
Processor 0
– Core 0
– Thread 0 0
– Thread 1 1
– Core 1
– Thread 0 2
– Thread 1 3
Timers
ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 3.021 MHz
Sys timer 1.000 KHz
Processors Information
Processor 1 ID = 0
Number of cores 2 (max 8)
Number of threads 4 (max 16)
Name Intel Core i3 2100
Codename Sandy Bridge
Specification Intel® Core™ i3-2100 CPU @ 3.10GHz
Package (platform ID) Socket 1155 LGA (0x1)
CPUID 6.A.7
Extended CPUID 6.2A
Core Stepping D2
Technology 32 nm
TDP Limit 65 Watts
Tjmax 102.0 °C
Core Speed 1596.2 MHz
Multiplier x Bus Speed 16.0 x 99.8 MHz
Stock frequency 3100 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AVX
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 3 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode not supported
Max non-turbo ratio 31x
Max turbo ratio 31x
Max efficiency ratio 16x
Min Power 60 Watts
O/C bins none
Ratio 1 core 31x
Ratio 2 cores 31x
Ratio 3 cores 31x
Ratio 4 cores 31x
TSC 3092.8 MHz
APERF 1596.3 MHz
MPERF 3093.1 MHz
Thread dumps
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01020104h
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 2 thread(s)
Cache descriptor Level 1, I, 32 KB, 2 thread(s)
Cache descriptor Level 2, U, 256 KB, 2 thread(s)
Cache descriptor Level 3, U, 3 MB, 16 thread(s)
Merci d’avance
Bonne journée