Voila, je voulais graver mais mon graveur ne se décide pas à graver, du moins si, cela se grave, jusque 98-100% mais cela me dit toujours erreur d’écriture, que je passe avec Nero 6 ou Cd burning xp, j’obtiens le même résultat. j’ai tenté de couper mes webcam, pensant que cela alterait la mémoire tampon, mais bon, j’ai décidé, de changer de port usb, encore une fois non.
Donc, j’aimerai savoir, avec le rapport de Nero, si on peut savoir si cela vient du graveur (externe je précise) ou du boitier, ou du pc.
EDIT: J’ai tenté de graver sur un autre pc, cela fonctionne. Si cela vient du pc, comment m’en sortir, j’en ai absolument besoin…
voici donc la copie du rapport Nero, mon graveur c’est un ATAPI DVD DW 8X16X8X16>
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 18:33:44
Version de Nero : 6.3.1.26 (Nero Express)
Graveur : <ATAPI DVD DW 8X16X8X16> Version: L.02 - HA 6 TA 0 - 6.3.1.26
Pilote d’adaptateur :<> HA 6
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM : Version: 1808 - HA 4 TA 0 - 6.3.1.26
Pilote d’adaptateur : HA 4
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR STM3160215AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320820AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Toshiba DVD-ROM SD-M17121808 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STCD-RW GCE-8481B 1.02 JRAID Port 4 ID 1 DMA: Off
CdRomPeripheral : ELBY CLONEDRIVE 1.1 VClone Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
Toshiba DVD-ROM SD-M1712 D: CDRom0
HL-DT-ST CD-RW GCE-8481B E: CDRom1
ELBY CLONEDRIVE H: CDRom2
ATAPI DVD DW 8X16X8X16 I: CDRom8
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2008
Compilation ISO
03:20:37 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
03:20:37 #2 Text 0 File Reader.cpp, Line 126
Reader running
03:20:37 #3 Text 0 File Writer.cpp, Line 124
Writer ATAPI DVD DW 8X16X8X16 running
03:20:37 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
03:20:37 #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disque entier, using DVD media
03:20:37 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2266207 (503:36.07, 4426MB)
03:20:37 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
03:20:37 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: ATAPI DVD DW 8X16X8X16, Media type: DVD+R
03:20:37 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
03:20:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2266208 (2266208) = #2266208/503:36.8
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266208 blocks [ATAPI DVD DW 8X16X8X16]
--------------------------------------------------------------
03:20:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ATAPI DVD DW 8X16X8X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4641193984, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2266208 | lead-out | 1 | 0x00 | 0x41
03:20:37 #12 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers
03:20:37 #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
03:20:37 #14 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé
03:20:37 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 16x (22 160 Ko/s)
03:20:37 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
03:20:38 #17 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 6, TA 0, LUN 0, buffer 0x03FD6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
03:20:38 #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 3:36,370 (216370ms) -> OK
03:20:38 #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
03:36:07 #20 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 6, TA 0, LUN 0, buffer 0x02B00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x4D 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
03:36:07 #21 CDR -1135 File Writer.cpp, Line 304
Erreur écriture
03:36:07 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
03:36:39 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
03:36:39 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
03:36:39 #25 Phase 38 File dlgbrnst.cpp, Line 1855
La gravure a échoué à 16x (22 160 Ko/s)
Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 05/10/2006 04:42:42
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\jraid.sys’: Ver=1.12.07.00 built by: WinDDK, size=43904 bytes, created 04/08/2006 10:29:24 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
merci d’avance
Edité le 20/10/2008 à 11:10
