Forum Clubic

Ma 2ème souris USB ne marche que quand elle veut - Debian "Etch" (Testing)

Salut à tous,

J’ai un problème parmi tant d’autres sur ma Debian “Etch” (Testing)
J’aurais pu poster ce message sur Debian-fr.org mais je connais mieux ce forum-là, donc :slight_smile:

Sur mon PC, j’ai deux souris : une à boule (berk), fournie en kit avec mon clavier sans fil, de marque Chicony WUR0108, et une optique filaire plus ancienne de marque QWare, reconnue sous Linux comme Cypress USB/PS2 Combo Browser Mouse.

Le récepteur du clavier et de la souris sans fil est branché sur le port USB n°1 de mon PC, ma deuxième souris, sur le port USB n°2. Tous deux fonctionnent à merveille sans conflit, que ce soit sous Windows XP, ou sur mes anciennes distribs Linux (Mandrake 9 & 10, Ubuntu 5.x).

Par contre sous Debian, ma deuxième souris fonctionne aléatoirement.
Elle est bien reconnue au boot, comme l’autre (modules USB HID chargés etc.), mais ne réagit pas à l’écran de connexion.
Du moins au premier boot. Car là où c’est étrange, c’est qu’apparemment, il suffit que je ferme ma session pour que celle-ci se mette à fonctionner comme si de rien n’était, et ce, dès l’affichage de l’écran de connexion. Parfois, le fait de la débrancher/rebrancher la fait fonctionner, mais pas toujours.

Notez également que, tant que le curseur ne bouge pas, je n’obtiens rien de cat /dev/input/mice avec ma deuxième souris. Par contre quand je ferme et rouvre ma session pour la “récupérer”, là, elle répond sans problème à cette commande.

Une idée sur l’origine du problème ? Tout à l’air pourtant OK dans le log du serveur X et dans xorg.conf, mais je vous laisse en juger :

Voici ce que me donne la commande dmesg

 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2993.152 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902000k/917504k available (1516k kernel code, 14984k reserved, 574k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5988.22 BogoMIPS (lpj=2994114)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 4388k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb980, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: a000-afff
  MEM window: f0000000-f1ffffff
  PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1e.0
  IO window: b000-bfff
  MEM window: f2000000-f27fffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(1143157544.121:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 228k freed
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000cc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000c000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000c400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000c800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hda: ST3160021A, ATA DISK drive
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xf2800000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hdb: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 1-1: device not accepting address 2, error -71
hdc: PIONEER DVD RW DVR-106D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 201
PCI: Via IRQ fixup for 0000:02:09.0, from 11 to 9
eth0: VIA Rhine III at 0x1b800, 00:0c:76:75:a8:5a, IRQ 201.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
usb 4-1: new low speed USB device using uhci_hcd and address 2
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-2: new low speed USB device using uhci_hcd and address 5
usb 2-1: new full speed USB device using uhci_hcd and address 2
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12
usbcore: registered new driver hiddev
hw_random: RNG not detected
input: Chicony USB Wireless HID Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
input: Chicony USB Wireless HID Receiver as /class/input/input2
input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1
input: Chicony USB Wireless HID Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1
input: Cypress Sem PS2/USB Browser Combo Mouse as /class/input/input4
input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver yealink
drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816
input: X10 Wireless Technology Inc USB Receiver as /class/input/input5
usbcore: registered new driver ati_remote
drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usbcore: registered new driver snd-usb-audio
mice: PS/2 mouse device common for all mice
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Linux video capture interface: v1.00
Loaded prism54 driver, version 1.2
intel8x0_measure_ac97_clock: measured 50532 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
gameport: EMU10K1 is pci0000:02:03.1/gameport0, io 0xb400, speed 1084kHz
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 217
PCI: Via IRQ fixup for 0000:02:0a.0, from 3 to 9
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217]  MMIO=[f2404000-f24047ff]  Max Packet=[2048]
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 185
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
saa7134[0]: found at 0000:02:02.0, rev: 1, irq: 169, latency: 32, mmio: 0xf2402000
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
saa7134[0]: board init: gpio is 0
Intel 810 + AC97 Audio, version 1.01, 12:55:41 Mar  6 2006
saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0] Tuner type is 38
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (saa7134[0])
tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
tda9887 1-0043: chip found @ 0x86 (saa7134[0])
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000010dc00491c3d]
eth1394: $Rev: 1312 $ Ben Collins <bcollins@debian.org>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
  Vendor: Medion    Model: Flash XL      CF  Rev: 3.0F
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: Medion    Model: Flash XL      MS  Rev: 3.0F
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: Medion    Model: Flash XL  MMC/SD  Rev: 3.0F
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: Medion    Model: Flash XL      SM  Rev: 3.0F
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
Adding 514040k swap on /dev/hda7.  Priority:-1 extents:1 across:514040k
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:1: Attached scsi removable disk sdb
sd 0:0:0:2: Attached scsi removable disk sdc
sd 0:0:0:3: Attached scsi removable disk sdd
EXT3 FS on hda6, internal journal
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
NTFS driver 2.1.25 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
hw_random: RNG not detected
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R300 Microcode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R300 Microcode

/etc/X11/xorg.conf

# xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
#   dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"  	# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"evdev"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver  "keyboard"
	Option  "CoreKeyboard"
	Option  "XkbRules"	"xorg"
	Option  "XkbModel"	"pc105"
	Option  "XkbLayout"	"fr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver  "mouse"
	Option  "CorePointer"
	Option  "Device"  "/dev/input/mice"
	Option  "Protocol"  "ExplorerPS/2"
	Option  "Buttons"  "5"
	Option  "Emulate3Buttons"	"false"
	Option  "ZAxisMapping"  "4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon R350 [Radeon 9800 Pro]"
	Driver  "ati"
	BusID  "PCI:1:0:0"
	VideoRam	131072
EndSection

Section "Monitor"
	Identifier	"99G"
	Option  "DPMS"
	HorizSync	30-96
	VertRefresh	50-160
endSection

Section "Screen"
	Identifier	"Default Screen"
	Device  "ATI Technologies, Inc. Radeon R350 [Radeon 9800 Pro]"
	Monitor  "99G"
	DefaultDepth	24
	SubSection "Display"
  Depth  1
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
  Depth  4
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
  Depth  8
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
  Depth  15
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
  Depth  16
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
  Depth  24
  Modes  "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen  "Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

Et le log de X /var/log/xorg.0.log (ou un truc de ce genre)

[code]
X Window System Version 6.9.0 (Debian 6.9.0.dfsg.1-4 20060114230205 David Nusinow <dnusinow@debian.org>)
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.15-1-686 i686 [ELF]
Current Operating System: Linux maxime 2.6.15-1-486 #2 Mon Mar 6 15:19:16 UTC 2006 i686
Build Date: 14 January 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.15-1-486 (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:19:16 UTC 2006
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 23 23:46:03 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(
) |–>Screen "Default Screen" (0)
() | |–>Monitor "99G"
(
) | |–>Device "ATI Technologies, Inc. Radeon R350 [Radeon 9800 Pro]"
() |–>Input Device "Generic Keyboard"
(
) Option "XkbRules" "xorg"
() XKB: rules: "xorg"
(
) Option "XkbModel" "pc105"
() XKB: model: "pc105"
(
) Option "XkbLayout" "fr"
() XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(
) |–>Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 8086,2570 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1462,0120 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1462,0120 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1462,0120 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1462,0120 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1462,7470 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1462,0120 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1462,0120 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1462,0120 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1787,8500 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1787,8501 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:00:0: chip 1260,3890 card 17cf,0014 rev 01 class 02,80,00 hdr 00
(II) PCI: 02:02:0: chip 1131,7134 card 16be,0003 rev 01 class 04,80,00 hdr 00
(II) PCI: 02:03:0: chip 1102,0002 card 1102,8065 rev 0a class 04,01,00 hdr 80
(II) PCI: 02:03:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 02:04:0: chip 8086,1040 card 16be,1040 rev 00 class 07,80,00 hdr 00
(II) PCI: 02:09:0: chip 1106,3106 card 1462,012c rev 8b class 02,00,00 hdr 00
(II) PCI: 02:0a:0: chip 1106,3044 card 1462,716d rev 46 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf2000000 - 0xf27fffff (0x800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xe0000000/27, 0xf1000000/16, I/O @ 0xa000/8
(–) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xe8000000/27, 0xf1010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf2404000 - 0xf24047ff (0x800) MX[B]
[1] -1 0 0xf2403000 - 0xf24030ff (0x100) MX[B]
[2] -1 0 0xf2000000 - 0xf23fffff (0x400000) MX[B]
[3] -1 0 0xf2402000 - 0xf24023ff (0x400) MX[B]
[4] -1 0 0xf2400000 - 0xf2401fff (0x2000) MX[B]
[5] -1 0 0xf2802000 - 0xf28020ff (0x100) MX[B]
[6] -1 0 0xf2801000 - 0xf28011ff (0x200) MX[B]
[7] -1 0 0x70000000 - 0x700003ff (0x400) MX[B]
[8] -1 0 0xf2800000 - 0xf28003ff (0x400) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xf1000000 - 0xf100ffff (0x10000) MXB
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[12] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[14] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[21] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[23] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXB
(II) Inactive PCI resource ranges:
[0] -1 0 0xf1010000 - 0xf101ffff (0x10000) MXB
[1] -1 0 0xe8000000 - 0xefffffff (0x8000000) MXB
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf2404000 - 0xf24047ff (0x800) MX[B]
[1] -1 0 0xf2403000 - 0xf24030ff (0x100) MX[B]
[2] -1 0 0xf2000000 - 0xf23fffff (0x400000) MX[B]
[3] -1 0 0xf2402000 - 0xf24023ff (0x400) MX[B]
[4] -1 0 0xf2400000 - 0xf2401fff (0x2000) MX[B]
[5] -1 0 0xf2802000 - 0xf28020ff (0x100) MX[B]
[6] -1 0 0xf2801000 - 0xf28011ff (0x200) MX[B]
[7] -1 0 0x70000000 - 0x700003ff (0x400) MX[B]
[8] -1 0 0xf2800000 - 0xf28003ff (0x400) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xf1000000 - 0xf100ffff (0x10000) MXB
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[12] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[14] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[21] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[22] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[23] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXB
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf1010000 - 0xf101ffff (0x10000) MXB
[1] -1 0 0xe8000000 - 0xefffffff (0x8000000) MXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf2404000 - 0xf24047ff (0x800) MX[B]
[6] -1 0 0xf2403000 - 0xf24030ff (0x100) MX[B]
[7] -1 0 0xf2000000 - 0xf23fffff (0x400000) MX[B]
[8] -1 0 0xf2402000 - 0xf24023ff (0x400) MX[B]
[9] -1 0 0xf2400000 - 0xf2401fff (0x2000) MX[B]
[10] -1 0 0xf2802000 - 0xf28020ff (0x100) MX[B]
[11] -1 0 0xf2801000 - 0xf28011ff (0x200) MX[B]
[12] -1 0 0x70000000 - 0x700003ff (0x400) MX[B]
[13] -1 0 0xf2800000 - 0xf28003ff (0x400) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MXB
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[17] -1 0 0xf1010000 - 0xf101ffff (0x10000) MXB
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MXB
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[22] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[23] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[24] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[25] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[26] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[27] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[29] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[30] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[31] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[32] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXB
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "evdev"
(II) Loading /usr/X11R6/lib/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 0.0.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 6.5.7
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE),
ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
ATI Radeon X850 5D4C (PCIE), ATI Radeon FireGL (R480) GL 5D50 (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Technologies, Inc. Radeon R350 [Radeon 9800 Pro]".
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(–) Chipset ATI Radeon 9800PRO NH (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf2404000 - 0xf24047ff (0x800) MX[B]
[6] -1 0 0xf2403000 - 0xf24030ff (0x100) MX[B]
[7] -1 0 0xf2000000 - 0xf23fffff (0x400000) MX[B]
[8] -1 0 0xf2402000 - 0xf24023ff (0x400) MX[B]
[9] -1 0 0xf2400000 - 0xf2401fff (0x2000) MX[B]
[10] -1 0 0xf2802000 - 0xf28020ff (0x100) MX[B]
[11] -1 0 0xf2801000 - 0xf28011ff (0x200) MX[B]
[12] -1 0 0x70000000 - 0x700003ff (0x400) MX[B]
[13] -1 0 0xf2800000 - 0xf28003ff (0x400) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MXB
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MXB
[17] -1 0 0xf1010000 - 0xf101ffff (0x10000) MXB
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MXB
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[22] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[23] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[24] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[25] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[26] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[27] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[29] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[30] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[31] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B]
[32] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IXB
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf2404000 - 0xf24047ff (0x800) MX[B]
[6] -1 0 0xf2403000 - 0xf24030ff (0x100) MX[B]
[7] -1 0 0xf2000000 - 0xf23fffff (0x400000) MX[B]
[8] -1 0 0xf2402000 - 0xf24023ff (0x400) MX[B]
[9] -1 0 0xf2400000 - 0xf2401fff (0x2000) MX[B]
[10] -1 0 0xf2802000 - 0xf28020ff (0x100) MX[B]
[11] -1 0 0xf2801000 - 0xf28011ff (0x200) MX[B]
[12] -1 0 0x70000000 - 0x700003ff (0x400) MX[B]
[13] -1 0 0xf2800000 - 0xf28003ff (0x400) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MXB
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX

Tu utilises debian sarge ou etch ? parce que ce n’est pas pareil et sarge R1 ça reste sarge !

Pour ce qui est de ta souris, je peux seulement de donner des indice car je ne sais pas d’ou cela peut venir :

  • le noyau : sarge utilise un 2.6.8 qui est un peu ancien, et il y a eu deux “gros” remaniements de la gestion de l’usb depuis (un avec le 2.6.9 et l’autre je me souviens plus)
    Pour ma part, j’avais des problèmes avec le 2.6.7 et ma (seule) souris usb, je n’ai plus jamais eu de soucis une fois passé en 2.6.9 et +

  • xfree86 : et oui… sarge utilise encore le vieux xfree86 4.3, la gestion de périphériques d’entrée multiples commence seulement à être pris en charge correctement avec le dernier xorg (6.9/7.0) qui sait se servir du module du noyau “evdev” (avec encore quelques soucis pour l’instant, mais ça s’améliore très vite, je pense que pour la prochaine version, ça devrait être très correct)

Donc je te proposerai 2 possibilités :

  1. essais de compiler toi même un kernel récent et vois si ça marche bien avec, si c’est le cas, poste un bug chez debian si tu utilises leur kernel
  2. Si tu utilises ta machine seulement pour le desktop, passe à debian etch qui utilise actuellement xorg 6.9 et un kernel 2.6.15 (bientot 16), xorg 7.0 est prévu dans sid la semaine prochaine, mais c’est une grosse migration, il mettra au moins un mois à arriver en etch.

Oups, confusion, oui j’ai bien une Debian “Etch” Testing chez moi et non pas une “Sarge”.
Donc je suis bien avec Xorg et non XFree86 (d’où le xorg.conf). Je corrige :wink:
Quant à tes conseils, j’essaierai de les appliquer à mon prochain démarrage de Debian.
Mais si d’autres ont la cause exacte du problème en tête, qu’ils n’hésitent pas :wink: