Localhost inaccessible pour Firefox

Epok75 · Mars 12, 2008, 12:52

J’ai installé WampServer (dernière version) et tout fonctionne correctement avec Explorer, mais pas avec Firefox. Il m’est impossible d’acceder au serveur par localhost, mais possible par 127.0.0.1.
J’aimerais comprendre le pourquoi du comment…

Merci pour votre aide
Epok

oximini · Mars 12, 2008, 2:44

Peut-être en éditant ton fichier hosts ?

Dans c:\windows\system32\drivers\etc\hosts

Tu dois avoir cette ligne en fin de fichier :
127.0.0.1 localhost
Edité le 12/03/2008 à 14:45

Epok75 · Mars 12, 2008, 4:54

oui j’ai bien cette ligne, mon fichier host semble correct …

oximini · Mars 12, 2008, 5:29

Tu utilise un proxy ?

Si oui, dans outil/option/Avancé/onglet Réseau/Paramètres… dans la ligne “Pas de proxy pour :” tu dois avoir “127.0.0.1, localhost”

Et si non… ben je sais pas et je passe la main

_Raynor_1_1 · Mars 12, 2008, 6:38

Effectivement, c’est assez bizarre.
Que te retourne un ping de localhost ?

Epok75 · Mars 12, 2008, 7:46

non non j’utilise pas de proxy …
ce qui est bizarre, c’est qu’il m’indique aucun message d’erreur … si je suis sur google par ex, la page ne change pas

Sans-Nom · Mars 12, 2008, 8:58

Et ton serveur ? Ca utilise du Virtual Host non? Peut-être que tu résoud bien localhost, mais que sur ton serveur Apache il n’existe pas de virtual host localhost? mais www.localhost.com ou autre.

Faudrait voir ton httpd.conf, ou voir les gus de WampServer voir ce qu’ils ont mis par défaut dans Apache.

Epok75 · Mars 13, 2008, 10:10

Ce qui me fait dire que ca ne vient pas de wamp ou de ma config, c’est que ca fonctionne nickel sous explorer …

Voici mon httpd.conf:

This is the main Apache HTTP server configuration file. It contains the

configuration directives that give the server its instructions.

See URL:http://httpd.apache.org/docs/2.2 for detailed information.

In particular, see

URL:http://httpd.apache.org/docs/2.2/mod/directives.html

for a discussion of each configuration directive.

Do NOT simply read the instructions in here without understanding

what they do. They’re here only as hints or reminders. If you are unsure

consult the online docs. You have been warned.

Configuration and logfile names: If the filenames you specify for many

of the server’s control files begin with “/” (or “drive:/” for Win32), the

server will use that explicit path. If the filenames do not begin

with “/”, the value of ServerRoot is prepended – so “logs/foo.log”

with ServerRoot set to “C:/Program Files/Apache Software Foundation/Apache2.2” will be interpreted by the

server as “C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log”.

NOTE: Where filenames are specified, you must use forward slashes

instead of backslashes (e.g., “c:/apache” instead of “c:\apache”).

If a drive letter is omitted, the drive on which Apache.exe is located

will be used by default. It is recommended that you always supply

an explicit drive letter in absolute paths to avoid confusion.

ServerRoot: The top of the directory tree under which the server’s

configuration, error, and log files are kept.

Do not add a slash at the end of the directory path. If you point

ServerRoot at a non-local disk, be sure to point the LockFile directive

at a local disk. If you wish to share the same ServerRoot for multiple

httpd daemons, you will need to change at least LockFile and PidFile.

ServerRoot “e:/wamp/bin/apache/apache2.2.8”

Listen: Allows you to bind Apache to specific IP addresses and/or

ports, instead of the default. See also the

directive.

Change this to Listen on specific IP addresses as shown below to

prevent Apache from glomming onto all bound IP addresses.

#Listen 12.34.56.78:80
Listen 80

Dynamic Shared Object (DSO) Support

To be able to use the functionality of a module which was built as a DSO you

have to place corresponding `LoadModule’ lines at this location so the

directives contained in it are actually available before they are used.

Statically compiled modules (those listed by `httpd -l’) do not need

to be loaded here.

Example:

LoadModule foo_module modules/mod_foo.so

LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module “e:/wamp/bin/php/php5.2.5/php5apache2_2.dll”

If you wish httpd to run as a different user or group, you must run

httpd as root initially and it will switch.

User/Group: The name (or #number) of the user/group to run httpd as.

It is usually good practice to create a dedicated user and group for

running httpd, as with most system services.

User daemon
Group daemon

‘Main’ server configuration

The directives in this section set up the values used by the ‘main’

server, which responds to any requests that aren’t handled by a

definition. These values also provide defaults for

any containers you may define later in the file.

All of these directives may appear inside containers,

in which case these default settings will be overridden for the

virtual host being defined.

ServerAdmin: Your address, where problems with the server should be

e-mailed. This address appears on some server-generated pages, such

as error documents. e.g. admin@your-domain.com

ServerAdmin admin@localhost

ServerName gives the name and port that the server uses to identify itself.

This can often be determined automatically, but we recommend you specify

it explicitly to prevent problems during startup.

If your host doesn’t have a registered DNS name, enter its IP address here.

ServerName localhost:80

DocumentRoot: The directory out of which you will serve your

documents. By default, all requests are taken from this directory, but

symbolic links and aliases may be used to point to other locations.

DocumentRoot “e:/wamp/www/”

Each directory to which Apache has access can be configured with respect

to which services and features are allowed and/or disabled in that

directory (and its subdirectories).

First, we configure the “default” to be a very restrictive set of

features.

Options FollowSymLinks AllowOverride None Order deny,allow Deny from all

Note that from this point forward you must specifically allow

particular features to be enabled - so if something’s not working as

you might expect, make sure that you have specifically enabled it

below.

This should be changed to whatever you set DocumentRoot to.

<Directory “e:/wamp/www/”>
#
# Possible values for the Options directive are “None”, “All”,
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that “MultiViews” must be named explicitly — “Options All”
# doesn’t give it to you.
#
# The Options directive is both complicated and important. Please see
# httpd.apache.org…
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
AllowOverride all

#
# Controls who can get stuff from this server.
#

onlineoffline tag - don’t remove

Order Allow,Deny
Allow from all

DirectoryIndex: sets the file that Apache will serve if a directory

is requested.

DirectoryIndex index.php index.php3 index.html index.htm

The following lines prevent .htaccess and .htpasswd files from being

viewed by Web clients.

<FilesMatch “^.ht”>
Order allow,deny
Deny from all
Satisfy All

ErrorLog: The location of the error log file.

If you do not specify an ErrorLog directive within a

container, error messages relating to that virtual host will be

logged here. If you do define an error logfile for a

container, that host’s errors will be logged there and not here.

ErrorLog “e:/wamp/logs/apache_error.log”

LogLevel: Control the number of messages logged to the error_log.

Possible values include: debug, info, notice, warn, error, crit,

alert, emerg.

LogLevel warn

# # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
  # You need to enable mod_logio.c to use %I and %O
  LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "e:/wamp/logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined

# # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo [localhost...](http://localhost/bar)

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL.  You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts. 
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client.  The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "cgi-bin/"

# # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock

“C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin” should be changed to whatever your ScriptAliased

CGI directory exists, if you have that configured.

<Directory “cgi-bin”>
AllowOverride None
Options None
Order allow,deny
Allow from all

DefaultType: the default MIME type the server will use for a document

if it cannot otherwise determine one, such as from filename extensions.

If your server contains mostly text or HTML documents, “text/plain” is

a good value. If most of your content is binary, such as applications

or images, you may want to use “application/octet-stream” instead to

keep browsers from trying to display binary files as though they are

text.

DefaultType text/plain

# # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php3

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

The mod_mime_magic module allows the server to use various hints from the

contents of the file itself to determine its type. The MIMEMagicFile

directive tells the module where the hint definitions are located.

#MIMEMagicFile conf/magic

Customizable error responses come in three flavors:

1) plain text 2) local redirects 3) external redirects

Some examples:

#ErrorDocument 500 “The server made a boo boo.”
#ErrorDocument 404 /missing.html
#ErrorDocument 404 “/cgi-bin/missing_handler.pl”
#ErrorDocument 402 localhost…