Forum Clubic

Erreur de gravage Nero 6 - Erreur lors du contrôle

Depuis 1 semaine, j’ai des problèmes de gravage avec Nero. Le gravage se passe bien ,mais des erreurs apparaissent lors du controle. J’ai mis néro à jour, téléchargé le dernier firmware : il y a moins d’erreurs qu’avant, mais il en reste toujours (1 dans le cas présent).J’utilise des DVD neufs Maxell avec lesquels je n’avait pas de soucis avant. J’ai fait une réparation de windows. J’ai fait une défragmentation des disques, et éteind les programmes qui peuvent prendre trop de ressource.
Voici mon fichier log :

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A115 - HA 1 TA 3 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GH5K - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B250R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B E: CDRom3
LITEON DVD-ROM LTD163 F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 523MB (535736kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.3.2006
Compilation ISO
22:54:33 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:54:33 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

22:54:33 #3 Text 0 File Reader.cpp, Line 124
Reader running

22:54:33 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4120B running

22:54:33 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

22:54:33 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

22:54:34 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2144447 (476:32.47, 4188MB)

22:54:34 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

22:54:34 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

22:54:34 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:54:34 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2144448 (2144448) = #2144448/476:32.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2144448 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

22:54:34 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4391829504, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2144448 | lead-out | 1 | 0x41 | 0x00

22:54:34 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

22:54:34 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:54:34 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

22:54:34 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

22:54:34 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

22:54:34 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 Ko/s)

22:54:34 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:54:34 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

22:54:34 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

22:54:34 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

22:54:42 #23 Text 0 File Cdrdrv.cpp, Line 1200
22:54:42.484 - E: HL-DT-ST DVDRAM GSA-4120B : Queue again later

23:08:16 #24 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4120B> start writing Lead-Out at LBA 2144448 (20B8C0h), lenght 0 blocks

23:08:16 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:08:16 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2144447

23:08:52 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5 540 Ko/s)

23:08:52 #28 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

23:17:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:17:16 #30 SectorVerify 11 File Cdrdrv.cpp, Line 9771
Sector 759044 on disc has different content to source

23:17:16 #31 Phase 81 File dlgbrnst.cpp, Line 1685
Data verification failed

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Merci de votre aide.

Je ne sais pas s’il y a un lien, mais en faisant un controle systeme par néro, j’ai le message d’erreur suivant :

c:\windows\system32\cmd.exe
system\currentcontrolset\control\virtualdevicedrivers. Le format du pilote du périphérique virtuel dans le registre n’est pas valide.

Je suis allé dans la base de registre et n’ai pas trouvé cettre ligne.

sachant qu’il y a plusieur lecteurs virtuels :

Daemon tools
Alcohol 120
Clonecd

t’as aucunement besoin d’installer celui de nero surtout si t’as déjà installer un de ceux cités.

Je n’ai pas envie de l’insatller. J’ai fait une install standart, et en faisant une vérification avec néro, j’ai eu ce message

Après nettoyage registre, réinstallation néro, voici mon dernier fichier log :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A115 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GH5K - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B250R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4120B E: CDRom0
LITEON DVD-ROM LTD163 F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 482MB (494572kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.3.2006
Compilation ISO
20:51:04 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:51:04 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

20:51:04 #3 Text 0 File Reader.cpp, Line 124
Reader running

20:51:04 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4120B running

20:51:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

20:51:04 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

20:51:04 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1418303 (315:10.53, 2770MB)

20:51:04 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

20:51:04 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

20:51:04 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:51:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1418304 (1418304) = #1418304/315:10.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1418304 blocks [HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------

20:51:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2904686592, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1418304 | lead-out | 1 | 0x41 | 0x00

20:51:04 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:51:04 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:51:04 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

20:51:04 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

20:51:04 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

20:51:04 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5 540 Ko/s)

20:51:04 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:51:04 #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

20:51:04 #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

20:51:04 #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

20:51:15 #23 Text 0 File Cdrdrv.cpp, Line 1200
20:51:15.921 - E: HL-DT-ST DVDRAM GSA-4120B : Queue again later

21:00:21 #24 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4120B> start writing Lead-Out at LBA 1418304 (15A440h), lenght 0 blocks

21:00:21 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:00:21 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1418303

21:00:51 #27 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5 540 Ko/s)

21:00:51 #28 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

21:03:10 #29 SectorVerify 11 File Cdrdrv.cpp, Line 9771
Sector 110779 on disc has different content to source

21:03:44 #30 SectorVerify 11 File Cdrdrv.cpp, Line 9771
Sector 457970 on disc has different content to source

21:05:24 #31 SectorVerify 11 File Cdrdrv.cpp, Line 9771
Sector 602047 on disc has different content to source

21:06:26 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:06:27 #33 SectorVerify 11 File Cdrdrv.cpp, Line 9771
Sector 1077815 on disc has different content to source

21:06:27 #34 Phase 81 File dlgbrnst.cpp, Line 1685
Data verification failed

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

vérifies que tu as suffisament d’espce disque libre là où il crée son image …

Pas de soucis, il y a 60 gigas de libres

Essaie de mettre des les drivers aspi mais pour xp…

http://www.blue-hardware.com/divers/downlo…lecharge181.php