Driver ATI quelle version avez vous ? + Perfs

ah au fait les gars, faut pas mettre la fenetre en arriere plan hein :stuck_out_tongue: parce que en faisant ca je monte a 4500 fps

:non: faut faire cela ds les régles quoi :slight_smile: (bon, je vous met qd même ts ds le vent avec mon ATI 8500 :p).

en effet ça change tout :

$ glxgears
9542 frames in 5.0 seconds = 1908.400 FPS
21908 frames in 5.0 seconds = 4381.600 FPS
29160 frames in 5.0 seconds = 5832.000 FPS
29290 frames in 5.0 seconds = 5858.000 FPS
29118 frames in 5.0 seconds = 5823.600 FPS
29255 frames in 5.0 seconds = 5851.000 FPS
29144 frames in 5.0 seconds = 5828.800 FPS
29081 frames in 5.0 seconds = 5816.200 FPS

tu disais koi j_c_p avec tes 4500, maintenant on sait que tu met ta fenêtre en arrière plan.

reduire la fenetre, et en arriere plan, ca c du hack!

tu fais comment pour mettre ça ds les réglages ?

Moi avec ma 6800 :smiley: je fai 8000 :smiley:

Edit : Avec mon ancienne 9800pro je faisai 7000 il me semble a verifié mon poste de la faq de mandrake

Si on se la joue comme cela, je monte à 20000 avec ma FX5900 :p.

jai retrouvé mon ancien post :

[fixed]32669 frames in 5.0 seconds = 6533.800 FPS
39145 frames in 5.0 seconds = 7829.000 FPS
38815 frames in 5.0 seconds = 7763.000 FPS
39280 frames in 5.0 seconds = 7856.000 FPS
38982 frames in 5.0 seconds = 7796.400 FPS [/fixed]

avec les 3.7.6 il me semble

Hop, je remets mon ancien aussi :
[fixed][jcp@jcpLinux jcp]$ glxgears
10694 frames in 5.0 seconds = 2138.800 FPS
12162 frames in 5.0 seconds = 2432.400 FPS
12164 frames in 5.0 seconds = 2432.800 FPS
12160 frames in 5.0 seconds = 2432.000 FPS
12122 frames in 5.0 seconds = 2424.400 FPS
12034 frames in 5.0 seconds = 2406.800 FPS
12153 frames in 5.0 seconds = 2430.600 FPS
12161 frames in 5.0 seconds = 2432.200 FPS
12162 frames in 5.0 seconds = 2432.400 FPS
12162 frames in 5.0 seconds = 2432.400 FPS[/fixed]
cf FAQ MDK quoi :p.

C’est moi qui a la plus grosse :stuck_out_tongue:

60FPS
ca veut dire que j’ai pas lacceleration 3D activé?

j’ai une GF2 MX
mandrake 10.1, les drivers nvidia sont installés de base (je sais pas lesquels, mais j’ai l’image nvidia en gros plan au demarage).
je dosi faire quoi?

voila mon config-4 en entier si c trop gros dite le je cuterai en edite

Section “ServerLayout”
Identifier “XFree86 Configured”
Screen 0 “Screen0” 0 0
InputDevice “Keyboard0” “CoreKeyboard”

PS/2 Mouse not detected

Serial Mouse not detected

    InputDevice    "USB Mouse" "CorePointer"

EndSection

Section “ServerFlags”
Option “AllowMouseOpenFail” “true”

EndSection

Section “Files”
RgbPath “/usr/X11R6/lib/X11/rgb”
ModulePath “/usr/X11R6/lib/modules”
FontPath “/usr/X11R6/lib/X11/fonts/misc:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/misc”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi:unscaled”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo”
FontPath “/usr/X11R6/lib/X11/fonts/PEX”

Additional fonts: Locale, Gimp, TTF…

FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"

FontPath “/usr/X11R6/lib/X11/fonts/latin2/75dpi”

FontPath “/usr/X11R6/lib/X11/fonts/latin2/100dpi”

True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!

FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
FontPath     "/usr/share/fonts/ttf/western"
FontPath     "/usr/share/fonts/ttf/decoratives"
FontPath     "/usr/share/fonts/truetype"
FontPath     "/usr/share/fonts/truetype/openoffice"
FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath     "/usr/share/fonts/latex-ttf-fonts"
FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"

EndSection

Section “Module”
Load “ddc” # ddc probing of monitor
Load “GLcore”
Load “dbe”
Load “dri”
Load “extmod”
Load “glx”
Load “bitmap” # bitmap-fonts
Load “speedo”
Load “type1”
Load “freetype”
Load “record”
EndSection

Section “InputDevice”
Identifier “Keyboard0”
Driver “keyboard”
Option “CoreKeyboard”
Option “XkbRules” “xfree86”
Option “XkbModel” “pc105”
Option “XkbLayout” “fr”

EndSection

Section “InputDevice”
Identifier “Serial Mouse”
Driver “mouse”
Option “Protocol” “Microsoft”
Option “Device” “/dev/ttyS0”
Option “Emulate3Buttons” “true”
Option “Emulate3Timeout” “70”
Option “SendCoreEvents” “true”
EndSection

Section “InputDevice”
Identifier “PS/2 Mouse”
Driver “mouse”
Option “Protocol” “auto”
Option “ZAxisMapping” “4 5”
Option “Device” “/dev/psaux”
Option “Emulate3Buttons” “true”
Option “Emulate3Timeout” “70”
Option “SendCoreEvents” “true”
EndSection

Section “InputDevice”
Identifier “USB Mouse”
Driver “mouse”
Option “Device” “/dev/input/mice”
Option “SendCoreEvents” “true”
Option “Protocol” “IMPS/2”
Option “ZAxisMapping” “4 5”
Option “Buttons” “5”
EndSection

Auto-generated by KNOPPIX mkxf86config

Section “Monitor”
Identifier “Monitor0”
Option “DPMS” “true”
VendorName “SML”
ModelName “SML6515”
HorizSync 30 - 57 # DDC-probed
VertRefresh 50 - 120 # DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
ModeLine “1280x1024” 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine “1024x768” 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
ModeLine “1024x768” 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768, 60.0Hz; hfreq=48.36, vfreq=60.00
ModeLine “1024x768” 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine “800x600” 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine “800x600” 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600, 56.0Hz; hfreq=35.16, vfreq=56.25
ModeLine “800x600” 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
ModeLine “640x480” 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine “640x480” 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
ModeLine “640x480” 31.50 640 656 696 816 480 481 484 504 -hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine “640x480” 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine “640x480” 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine “768x576” 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine “768x576” 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine “768x576” 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine “768x576” 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine “768x576” 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine “800x600” 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine “1024x768” 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine “1152x864” 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine “1152x864” 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine “1152x864” 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine “1280x960” 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine “1280x960” 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine “1280x960” 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine “1280x1024” 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine “1400x1050” 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine “1400x1050” 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine “1400x1050” 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine “1400x1050” 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine “1400x1050” 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine “1600x1200” 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection

Section “Device”
### Available Driver options are:-

sw_cursor is needed for some ati and radeon cards

Option “sw_cursor”
#Option “hw_cursor”
#Option “NoAccel”
#Option “ShowCache”
#Option “ShadowFB”
#Option “UseFBDev”
#Option “Rotate”
Identifier “Card0”

The following line is auto-generated by KNOPPIX mkxf86config

Driver      "radeon"
VendorName  "All"
BoardName   "All"

BusID “PCI:1:0:0”

EndSection

Section “Screen”
Identifier “Screen0”
Device “Card0”
Monitor “Monitor0”
DefaultColorDepth 16
SubSection “Display”
Depth 1
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 4
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 15
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 16
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 24
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 32
Modes “1024x768” “800x600” “640x480”
EndSubSection
EndSection

Section “DRI”
Mode 0666
EndSection

Euh, je veux pas faire de l’anti nvidia , mais a la base ce topic concernait les possesseurs d’ATI.

Bon je viens de passer dans la dernier version des drivers ATI
splissken@splisskpc:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 1.3.4641 (X4.3.0-3.14.6)

Résultat guere mieuxsplissken@splisskpc:~$ glxgears
6028 frames in 5.0 seconds = 1205.600 FPS
6556 frames in 5.0 seconds = 1311.200 FPS
6555 frames in 5.0 seconds = 1311.000 FPS
6557 frames in 5.0 seconds = 1311.400 FPS
6554 frames in 5.0 seconds = 1310.800 FPS

Qui est arrivé a faire marcher le panneau de config ATI sous Debian ?

up

moi en suivant un tuto que j’ai pas en tete la

et il sert un peu a rien …

glxgears spa super fiable aussi comme bench :o
rien ne vaut un bench ut2004 ou doom 3 :stuck_out_tongue:

Net amélioration avec les derniers drivers dispo , je gagne 600 frames

splissken@splisskpc:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 1.3.4893 (X4.3.0-8.10.19)

splissken@splisskpc:~$ glxgears
8460 frames in 5.0 seconds = 1692.000 FPS
9529 frames in 5.0 seconds = 1905.800 FPS
9526 frames in 5.0 seconds = 1905.200 FPS
9529 frames in 5.0 seconds = 1905.800 FPS

Ouai pour glxgears mais faut voire que sa donne dans les vrais jeux !